The Headcase Stax thread

[spritzer]

Licron is not available here and shipping anything under pressure is a no-go.  

The Comfort was available at my local store so I'll give it a go.  Nice consistency too and dirt cheap.  

[ludoo]

17 minutes ago, spritzer said:

Licron is not available here and shipping anything under pressure is a no-go.  

The Comfort was available at my local store so I'll give it a go.  Nice consistency too and dirt cheap.  

Share a pic please, once you verify it works. BTW I bought Licron from Farnell, they had no trouble shipping it to an EU country.

[chinsettawong]

5 hours ago, spritzer said:

Interesting, I'll see if I can find that locally.  Do you apply it with an airbrush or a sponge?  

Aumkar suggested to apply it with an airbrush, but I simply put a little on microfiber cloth and wipe it on the diaphragm.  After it dries, I buff it off.  It’s dirt cheap and working very well.  
 

Edited Monday at 01:34 PM by chinsettawong

[spritzer]

2 hours ago, ludoo said:

Share a pic please, once you verify it works. BTW I bought Licron from Farnell, they had no trouble shipping it to an EU country.

We aren't in the EU and that muddles everything.  

1 hour ago, chinsettawong said:

Aumkar suggested to apply it with an airbrush, but I simply put a little on microfiber cloth and wipe it on the diaphragm.  After it dries, I buff it off.  It’s dirt cheap and working very well.  
 

I'll try that plus I should have some airbrush equipment somewhere.  I just made some new stators for my Senn HD6x0 design that I want to try out.  

[Pirx]

7 hours ago, chinsettawong said:

Aumkar suggested to apply it with an airbrush, but I simply put a little on microfiber cloth and wipe it on the diaphragm.  After it dries, I buff it off.  It’s dirt cheap and working very well.  
 

But what about humidity? It doesn't seems to be immune for it.

[chinsettawong]

4 hours ago, Pirx said:

But what about humidity? It doesn't seems to be immune for it.

Humidity is always a problem.  We'll just have to try and see.

[Timb5881]

Hey Spritzer, would static- guard anti static spray work?

[spritzer]

Probably, never tried it and it always a question how long the coating would last but well worth a try.  

[Kung]

Try an ATO alcohol solution with a concentration below 10% and add 1-2% volume of AEO7. This is the conductive coating I use now. It can make a transparent coating with a stable surface resistance of 10^8Ω

[judo]

My weakness I do not know these code words: ATO, AE07. I learned chemistry in a few decades ago if not in English.

....

I googled some Fatty Alcohol Polyoxyethylene Ether  and antimony doped tin-oxid. Where can you get these for kitchen tuning?

Edited 2 hours ago by judo