My boards arrived this week in perfect condition. Thanks to you Tran for the huge effort that went into this. Thanks also to deadlylover and tim22 for sorting out the local distribution.

X2. As John said....

X3

I only had to deal with four or five people, I can't even imagine how much work went into organizing this entire board run. Many thanks Tran for letting us in!

If you ever need anything from here down under.....

I would like to say thanks to Ujamerstand for the Bom Lil Knight for the boards. I am about to order all the parts and hope for the best with this build. I was hoping someone would tell me the right transformer to order from SumR?

I should be happy if I can just get it together working but I really would like the smallest lightest chassis possible. I am going with off board heat sinks and have an idea in my head of how I would like to manage this. I am going to find a pair of aluminum heatsinks about 6in tall and 15in or so wide. the amp boards will be mounted vertically on the heat sinks on each sides and the psu board will be horizontal in between the two vertically mounted amp boards. The toroid will be in the back maybe even vertical to save more space. I will use quarter inch aluminum plate for the front and back relying on the heat sinks for side support and a vented lighter gauge aluminum for the top and bottom. Would this be a bad building practice with too much RF interference or possibly a good design?

I'll add the specs into the BOM once I verified that the 450VAC transformer is able to generate the bias voltage without the voltage doubler.

I would like to say thanks to Ujamerstand for the Bom Lil Knight for the boards. I am about to order all the parts and hope for the best with this build. I was hoping someone would tell me the right transformer to order from SumR?

Jay, I posted the transformer specs from SumR on the main KGSSHV thread Please note that transformer is targeted for a 500V output build. If you are building the standard 450V version, you will probably wanted a little lower voltage at the secondaries (probably 420V instead of 450V). I have the transformers in hand, and I should finish up the power supply this week. I hope to test it this weekend, and I will post how they work.

Going to close this thread so build discussion can be continue in their respective threads. PM me if you'd like it open.

Sending out a pm for full address requests this evening to the rest of the T2 buyers, these are all packed up.

Could someone post the link for the respective follow-up thread (or open the new thread)? I have not seen any one yet.

emooze and krypticmind shipping tomorrow. Sorry, long workday, could not do it today.

wedge and my passwordis did not answer back. Lil Knight will decide what he wants to do with those boards.

Got the boards! Thanks Tran & Eggil!

Edited October 1, 201114 yr by purk

Got the boards! Thanks Tran & Eggil!

Picked up mine today too, and would also like to extend my thanks.

Received the boards in good shape. Big thanks to Enrique, Tran, and especially Dr. Gilmore for making this happen.

Good to hear that, guys.

Right now Enrique (eggil) still 1x on-board, 1x off-board, 3x KGSSHV psu left since some people haven't paid (and I think they won't). Anyone in the CONUS interested in the boards, please contact me.

Edited October 2, 201114 yr by Lil Knight

Actually the only ones left are the ones mentioned in the spreadsheet from cancelled orders from wedge and mypasswordis, minus the one you want me to send arthur b.

https://docs.google....&hl=en_US#gid=0

Thank you Tran, Enrique, and Kevin.

Still waiting for 3 2 payments from T2 buyers. I really want to get these out in one trip since the PO isn't close to my house. Thanks to everyone that paid.

Deepak,

If anyone of the T2 buyers cancel the buy of a T2 set - I happily buy one T2 set. Just PM me.

And THANKS!! to you guys that have made this group buy possible.

Deepak,

If anyone of the T2 buyers cancel the buy of a T2 set - I happily buy one T2 set. Just PM me.

And THANKS!! to you guys that have made this group buy possible.

I think these guys will want to build the most awesome electrostat amp ever! As far as I know the boards themselves are paid for, I just need to be paid for the shipping.

The 6 people that paid were sent out this afternoon

Deepak,

Thanks for the info.

Tran connected me earlier today and he has promised to send one set of the T2.

Posting this here to spread the word, this is for the KGSSHV:

The printing on the power supply board for BR1 is wrong. The "+" is at the wrong side. I guess it's a board from the current group buy (Production Rev 0.6). So be carefull if you have one of these boards.

Yup, I just checked and the bridge for the +/-15V supply is indeed reversed. Just flip it over and you will be fine (- where + is marked).

Edited October 4, 201114 yr by manaox2

My DIY T2 boards arrived safe and sound, my concern about shipping damage was unfounded. MANY THANKS TO ALL INVOLVED!!!!

This T2 amp board is silly huge. I love it.

Edited October 8, 201114 yr by Milosz

Got my boards today. Big thanks to Deepak for handling the US distribution, Lil Knight for organizing the board run, and of course Kevin Gilmore and everyone else involved with the design. Now the fun part starts

Got my boards today. Big thanks to Deepak for handling the US distribution, Lil Knight for organizing the board run, and of course Kevin Gilmore and everyone else involved with the design. Now the fun part starts

x2 Thanks guys!

Moved a few posts to their respective build threads to keep it easy for those building these amps. Going to close the thread again, but PM me if someone needs it open for GB discussion/sales.

Dynafet build discussion (<-- someone building one create a thread and I'll link it)