July 16, 201115 yr comment_458415 Good luck Gary. I do plan to own a pair of TP myself someday. I'm already proud to own a pair of Smegma Pro and Smegma SFI pucks. Report
July 17, 201115 yr comment_458646 Very best of luck Gary! If you need a review section, then apart from the ones from headfi, if you need any quotes of appreciation from people who have owned your TPs before id be happy to. and im sure a lot of others would be too. Report
July 17, 201115 yr comment_458738 BTW, When did you start carving? I still find it amazing that you've become such a polished woodworker in such a short span of time. I'm definitely a fan! Report
July 17, 201115 yr comment_458746 Time to send some to Tyll for a little review now, no? No kidding! Actually, I'm really going with this: I enjoyed getting to hear and measure a pair of you cans a while back, they were damned good, and I think it makes all sorts of sense to fire up a business. I would like to review some, and maybe even build one of your kits. PM on the way! And congrats!!! Report
July 17, 201115 yr Author comment_458747 I started (low) power carving about 3 weeks ago. Bought a little proxxon glass engraver and got to work. It's just freehand stuff so nothing too exact but it is a lot of fun. I sit on the deck with a big-ass visor on my head so I can see what I'm doing and grind away. It's surprising how little info there is about it. Lots on chip carving but I guess with power stuff you're just supposed to know what to do I figured, as far as I can tell, nobody else is carving cups so maybe another small niche market. Trying to come up with thing people don't know they want yet... I hope Edited July 17, 201115 yr by Smeggy Report
July 17, 201115 yr comment_458754 As my mother always said, nothing ventured, nothing gained, so more best wishes on the new venture to my ro-bro. Very glad to have you back posting. Report
July 17, 201115 yr Author comment_458761 thanks, been a complete roller coaster this last few months and driving me crazy! Report
July 18, 201115 yr Author comment_458996 Very best of luck Gary! If you need a review section, then apart from the ones from headfi, if you need any quotes of appreciation from people who have owned your TPs before id be happy to. and im sure a lot of others would be too. That sounds like a great idea Kabeer, I should ask people for short quotes to put on my site, I'm not much good at blowing my own trumpet Report
July 19, 201115 yr comment_459017 Gary, DO NOT discuss your wood-carving techniques (on other sites I mean, here you can, but maybe keep it Casino only). You already have people copying your TP's, don't give out any more secrets. Keep some stuff confidential... just don't put nail polish on them. Heh. Report
July 19, 201115 yr comment_459038 And send pm's to anyone who chips their wood headphones and tell them they're stealing your ideas. Report
July 19, 201115 yr Author comment_459040 Technique is something you have to learn yourself, unfortunately there's nothing stopping people seeing what I've done and trying it themselves. If people do start copying it (which I expect some might) there's not much I can do about it except complain. However, it's not something anyone can do, you still need a certain level of skill and aptitude. I'm certainly not planning on handing the info out on a plate. I've shown them how to make their own thunderpants mod and I'm happy with that as long as they don't call them thunderpants or make them to sell. Generally they've been pretty good about it so far, after all, this did start out in the realm of DIY info sharing where it still belongs for those wanting to try their own. Of course, now my existence depends on it I'm trying to be a little less open about what I do and people are respecting it as far as I can tell. I know I can sometimes be a bit optimistic about peoples motives to my own detriment but that's just me. Anyway, I appreciate you guys trying to protect me from myself, I can be a bit of a dumbass at times Report
July 19, 201115 yr comment_459055 Very nice work. I will have to think about those maple ones. Report
July 19, 201115 yr comment_459081 You either have it or you don't. Gary most definitely has it, most don't. A cheap rip off usually looks like a cheap rip off. Gary's skills would be hard to duplicate, and being an ass about peoplke trying would make him Larry, not Gary. Report
July 20, 201115 yr comment_459277 Gary's skills would be hard to duplicate, and being an ass about peoplke trying would make him Larry, not Gary. Well put Steve. Gary, I'm super excited to see you taking it a step further. Something tells me I'll have trouble staying away from your engraving capabilities. Wishing you the best of luck with the sole proprietorship, my friend. Report
July 20, 201115 yr comment_459427 Too much to suggest too soon I know. But down the road you could branch out to selling complementary manufacturers' stuff, a la Drew at Moon Audio. I agree with Steve. You're selling craftsmanship, which speaks for itself. Can you trademark "Thunderpants"?, I wonder. Report
October 3, 201114 yr comment_472636 Whoa! Awesome mention: http://theawesomer.com/thunderpants-diy-headphones/127317/ Report
October 3, 201114 yr comment_472662 Mentioned on Gizmodo as well! Edited October 3, 201114 yr by Beefy Report
October 4, 201114 yr comment_472694 Darn nice to see the references in the two websites posted above. Congratulations! Report
October 4, 201114 yr comment_472720 Nice, that last pair looks much better in my living room You suck. I retweeted Smeggy's mention on gizmodo. Steve Guttenberg retweeted me. Orders are a pain in the ass ... in the best sort of way. Report
October 4, 201114 yr comment_472724 You suck. I retweeted Smeggy's mention on gizmodo. Steve Guttenberg retweeted me. Orders are a pain in the ass ... in the best sort of way. Very happy to hear Gary will be kept busy Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.