n_maher

I don't think you'll find such a thing (negative gain DAC) and certainly nothing called an amplifier is going to be designed to lower the signal strength. https://goldpt.com/sa1.html That's my recommendation. Cheap, no, but if don't want butchered signal and don't want digital attenuation I'm not sure I see much else short of DIY solutions.

I'd happily buy some Mysore beans, Dan, when you get to that point. I haven't seen those available thru OBR for quite a while.

This isn't really a forum for headphones.

^^^ Fax is on...

Here's to hoping that everyone had a safe and happy Christmas.

Who the F buys biscuits when they are already planning to cook? No wonder your biscuit karma sucks, man.

Less grammar, MOAR Happy Birthday!

Tried to post this earlier from my phone and failed - Christmas Breakfast 1. Chili Cheese Eggs - egg, cheese, and mild green chillies. 2. Cinnamon French Toast Casserole

😂 - oh yee of little faith, I'm already at the midfield solution. The bike normally runs 29ers (max width 2.6) and is fully capable of running 27.5s (max width 2.8) so this fall I bought a set of nice 27.5 rims for this express purpose. Once I did that I moved to phase two, why not just buy another bike to save the hassle of swapping wheels? And I solved the cassette problem by having a spare one around. I am, if nothing else, pretty adept at solving problems through acquisition.

Steve, you're 100% right on what cycling means to me. The "worth it" aspect is that snow and winter riding has been so limited for the last few years that having $400 tires sitting around is a tough sell to the other half. I'll probably do it anyway, but the struggle currently is trying to get her to accept the proper solution is actually another bike to run the aforementioned seriously expensive tires which makes the solution pretty effing d-_-b. Just haven't found the right steel or carbon hardtail yet.

@luvdunhill - I've just been using standard pellets (whatever I have on hand) in the tray with some chips on top. I usually hit it with the torch at the start to the point where it's burning comfortably on it's own and difficult to blow out. That seems to create enough of a smoldering fire that it will burn through the pellets and chips at a nice steady rate. I really only care that it burns/smokes well for the first few hours.

This thread has gone far too quiet. I converted the Genius to 27.5 mode for the winter so I could run as fat a tire as possible. I'm currently testing a pair of 45NRTH Wraithchild studded 27.5x3.0 tires. Today's ride, before the impending Christmas monsoon, was a success. Now to decide if dropping 4 bills on tires is worth it.

Happy Birthday!

I'm pretty sure that Justin used those Vampire RACs on multiple products. There's a chance that I have a pair downstairs and if so, I can send them your way for prototyping. I used them on multiple projects (KGSS, Exstata, etc.).

Nice lamp, Doug. Me: I've got two nephews that are budding YouTubers so for Christmas we made them fake Creator Awards for them. I've got three coats of gold paint on them and they look acceptably funny. Here's what they looked like unfinished.

^^^ We've used a shopvac w/ my dad's Dewalt planer for going on 10 years.

Annual right of Xmas - sugar cookie day. I made the dough yesterday so it'd be easier today.

Unpictured - the Jonokuchi has been coaxed back into life. B+ is running high so I'm going to talk with Pete about the best way to knock that down some without over complicating life but it was nice to have music coming out of both channels again.

^^^ That thing is going to be a beast.

About the same here. My parents, just an hour north, got two feet.

I'd recommend finding a friend instead. While it'll be pretty simple for a routine user of a table saw it's certainly not something that I'd take on as one of my first. Given your use of metric dimensions I'm going to guess that you're not in the CONUS or some of us might be able to help.

I would have liked to hear the resulting great kitty meow/hiss after the bonk.

Happy Birthday!

I'm with Doug, there's no good or easy way to do this with CNC and it's definitely not required. I drew this up in CAD real quick just to rough out some of the missing dimensions (thickness, heal and toe angles) and I think you could make this out of a single piece of rough sawn lumber. I'll defer final species recommendations to others but finding 6" wide 5/4 oak might not be a bad place to start and not horribly expensive. To me the hardest part is figuring out how to do the bevel on the heal - best thought there is with a router after using a dado blade to hog out the underside. But with a finished thickness of ~6mm (1/4") it's going to want to flex/deflect. I'd have to play around with it in real life to figure out any better solution. About the CNC solution - the real challenge is the two-sided nature and true 3D requirement. A lot of machines and affordable software are really good at 2.5D (translation in purely the vertical when cutting in the Z direction) but struggle when it comes to shapes like what you have described in your image. Also, some quick Googling yielded results very near what you are asking for - No Endorsement Implied - a more focused search would likely yield better results. Me - I'm working on fixing my Jonokuchi which had developed a problem with one channel. I opened the chassis hoping to easily spot the problem and did. Two caps in serious distress (one blown) and two resistors torched and failed open. Replacement parts ordered last night due to be delivered tomorrow which will likely get deferred to Friday but hopefully repairs can be accomplished this weekend. I've spoken with Pete and we don't think there's likely anything else at play other than one of the resistors drifting driving current and voltage up in an escalating fashion that resulted in the cap expelling its magic fluid filling.

8-12" here, snow blower is gassed up, so is the generator, and there's bacon in the fridge.