Headphones

A few days ago I decided to take the step up to much higher quality Audio. After researching my choices for around 200-300 dollar headphones for about 8 hours I ended up buying the Denon AH-D2000's for about $210 on amazon. My first step into high end audio was the Shure SE530 in ears which were nice, but i ran them over with my rolly chair and broke them :palm: Since then i've had the bose triport headphones and the bose in ear headphones, which have been adequate but very disappointing in terms of bass. I am a basshead so I believe I will thoroughly enjoy the heavy bass of these ahd2k cans. Anyway, when these Denons come sometime this week I would be glad to giv…

What part of the headband do you think this replaces? Audio Cubes II - High Fidelity Audio Products Does it replace the thing with the hole in it in this picture>?

[url=http://www.phileweb.com/news/d-av/200810/16/22364.html]

They are sold out (for how long, who knows), but I wonder how this affects sound: Comfort Rings (Make Grado's more Comfy!) (1 pair)-LIMITED SUPPLY [CanRings] - $15.99 : Listening Station!, Specializing in Quality Headphones

I just bought a pair of these from Beach Camera (refurb) and initially I am not too impressed with them. I find them to be bassy and a bit bloated and lacking in midrange definition. Reading the mod thread on HF, it sounds like this mod would do what I think these need, but I was wondering if anyone here had done this mod and what your impressions were with it? Or would I be better off just getting rid of these? I was looking for an inexpensive closed can for home use; I need something that doesn't leak sound to disturb others in the room. I am driving these with a Dynalo, so plenty of power.

Hey guys, I'm planning on designing some leather Grado pads but I would like to get some suggestions as to whether people would prefer the pads being more bowl shaped or GS1000 pad shaped. Any other suggestions are greatly appreciated. thanks

Pretty nice friggin' phones for a baby!

Apparently on July 1, Amazon started selling some new AKG phones. I have no idea how new, but I just noticed the ad for it for the first time. I find the 172 and 272 (both closed back) the most interesting myself, but I'm sure Fitz will get them all and tell us how they are.

Hey guys & gals, I'm new hear but found this through Google. So awhile back I had my HD650's directly plugged into the front of my Mac Pro and I pushed my chair back and slightly bent the plug as well as the headphone jack in the Mac Pro. So for about two months, I'd have to jiggle the plug and keep tension on the cord in order to get sound from both drivers. Then about two weeks ago, I couldn't get the right driver to play. So I bought a new adapter to fit in my computer, nothing. So I tried my headphones in my Amp without the adapter, same deal, only the left side working. I've tried other headphones in my computer and they work. So, did I blow a driver someho…

Seems like Audio Technica is releasing an update model to their ATH-ANC7 called ATH-ANC7b. Audio Technica said the improvements made to the model include new electronics (not sure if they meant drivers, noise canceling or both), redesigned earcups for better comfort, the battery is easily accessible, and the package now has long and short cables. It should be available by August for the retail price of $220. New ATH-ANC7b QuietPoint headphones

These East Indian Rosewood woody Grado 225s were the biggest and nicest surprise for me at CanJam bar none. Who knew Nate could not only build nice cables and amps, but is more than pretty handy with a lathe? The pics, as often happens, don't do them justice, but I'm loving the looks, and, lucky me, they also sound good. Thanks again Nate and Dan.

The Perfect Unison’s wooden headphones | SynthGear

Well, I've had my first exposure to HD650s using push-pull amplification. I have to say, I'm stunned. I *hate* these headphones single ended, for reasons which I will list here. Their bass is loose and overwhelming; there is a very slight grain to their sound, which is more of a characteristic of most dynamic headphones in general to my ears (but not all); the highs are muffled and obscure the detail; the impulse response is slower than a Geo Metro; the tone is far too warm and there seems to be bass even where there shouldn't be. And I have no idea why Sennheiser decided to voice the HD650 this way - rather I can guess (more bass when underdriven), but I have no idea…

Has anybody heard the Senn HD238's? I am currently using PX100's for portable and am looking to replace them. From what I have read, seems like they may be a decent choice.

This time we are looking at some IEM or just entry level Shure. They are designed to work with music players on-the-go with high noise isolation. Bundle Nothing really special here, 4 sets of silicon tips of different sizes, a carrying case, a extender cable (you will need it useless you hang your iPod on your face.) Build Real solid product, looks and feels like it can withstand many years of abuse from me. Cables are tough and a bit on the hard side, the cable leading from the headphone isn't that high quality, its just like standard cable to me, massive room for improvement. Worth noting that the extension cable have build quality leagues above the wh…

I was reading various Sony brochures, but still can't figure this out. Will ECR500 box work with ECR 600 and vice versa? Does anyone here have ECR600 box? I will have two ECR500 boxes soon and would gladly trade ECR600 box for one of my 500 boxes it it will work with ECR500 to check out what the differences are.

So, I've seen some oblique references to "Duggeh's" surrounder (I think). What's the story? It's not like they don't exist. To wit: Zalman; Tritton; I'm pretty sure I've others.

Does anyone know the dimensions of the new Grado box? GRADO Wooden Box

Oops, I mean $40k. But it has to be a complete system. I've been thinking about downsizing. Any advice? Newbie here. Things seem a little turned upside down here. It might take me a while to adjust and get myself turned right side up, but I'll try. So that's it for my first post. Oh, except to say "Hi, all you mother fuckers and pond scum lickers!" I can say that here, can't I? It was nice talking to some of you at CanJam.

Could anyone point out the precise differences between the Stax SR-202 and the SR-303? I understand that the difference between the '303 and '404 is only the cable, but I was wondering what about the '202? I have read something about it somewhere (how's that for being vague.. . Maybe in the Stax thread), but I am unable to trace it back. Thanks for the help!

I know some of you guys are very happy with your UE 10's and 11's, but those are well beyond my budget, and I don't think I'll ever be willing to spend that much. So I've been thinking these days about giving a custom pair of IEMs a shot. I don't know what kind of exposure HC has compared to HF, but I figured I'd ask here first. Of the customs that are moderately priced, I only know of the LiveWires and the FreqShow (their highest model??). I know there's the UE 5 also, but I don't remember hearing much talk about them as everyone seems to just get the 10/11's. hMm.. I listen to everything, so I'm looking for a good all arounder. As for headphones, I own a pair …

I've been thinking of picking up a pair of closed headphones again. I used to own the Beyer DT250-250 a long time ago based on Headroom's ancient recommendation and liked them. Tried the AKG K271S when it first came out and liked the midrange but disliked the strange quality of what bass there was (no impact at all). Haven't really been following closed cans since. There's a thread on Head Case about closed cans but it's somewhat dated. It looks like the HD25-1 II was the flavor of the month on the other site for a while and has a persistent following. I listened to this at the local dealer out of a NAD integrated (not the greatest audition, obviously) and felt that the b…

As most of you know, the new Stax Lambdas suck compared to the older models. This "fact" has puzzled me for quite a while since the same drivers mounted in either the SR-Sigma or the 4070 housings just sing. In the case of the Sigmas, the Sigma 404 out paces the other two Sigma models in every area I can think of by a large margin. To make a long story short, I picked up an old, beaten up SR-404 in Japan to test out some theories. I could have bought a new one but half the fun is to take some old, neglected banger and make them shine again. The first thing I noticed about this set was that the drivers didn't align like they should. They were only a couple of mill…

Hi everyone: I'm thinking of getting a pair of these: Stereo microphones, USB Microphones, Preamplifiers, Digital Recorders, Cables and more at Rock Bottom Prices from The Sound Professionals - Great deals on Microphone, Preamplifier, Digital Recorder, Cable and more! and then using the convolver plugin for Foobar to turn a pair of headphones (say HD650s) into a pair of R10s (if I can get a measurement on a pair). I can sort of do the same thing already with my equalizer but a convolution based method would capture a lot more of the intricacies than my method would. I think it's likely that it could even capture the effects of the tubes in the line etc which woul…

Hello, I'm going to build a new system, and I need your experience . Let's begin by saying that currently this is my setup: FLAC -> SB Live! 5.1 -> SONY MDR-V150 which I consider to be real high-end (in fact it comes to an end). Anyway, I just wanted to step-up, and by reading many comments and reviews, I decided this would have been my next setup: FLAC -> ESI Juli@ -> Cambridge Audio 840C -> AMB Audio Beta22 Balanced -> APureSound V3 Balanced -> Sennheiser HD-650 Here are some informations: - I like to listen to different genres of music. Particularly I like Classical music (but I listen to Electronica, Rock, Metal and Jazz, too)…