Home Source Components

Ok, after the wife of all people told me to get the records and turntable out, not used since the 80's... here is where we stand, remember this was bought on a high school/college student budget... Technics SL-D3 mechanically still works Cartridge: ADC PSX-30 stylus is slightly bent Denon 3806 Receiver has phono input (MM type?) Where do I start to get going fast, and get the most improvement for the least $$ ?? I am thinking a new cartridge may be the first step.... Suggestions?? New name (analPete??)

My apl denon 3910 arrived today, early impressions are extremely positive, it might be the best digital I've heard. I've attached some pics, including some internal shots. Some of the pcb and parts added are mounted in what I'd call a questionable fashion using some sort of epoxy looking material. It does sound really fantastic though.

Headamp Pico vs. Headroom Single-Ended Desktop with DAC Surely someone has had the opportunity to do a shoot out between these two, or has heard both and has a firm enough memory to compare them? Though I don't really have a practical use for either of them, these all in one headphone-centric units just fascinate me.

Has anyone heard their CD77 player?

Fungi!! Anyone know what's so new about this? SE-200PCI LTD All I know is that it is similar to the SE-200PCI and it is limited edition.

From reading the WTB: PS1 thread, I did a little research and found out that people like the sound from the PS1. I even found this... Dynavox Dynastation Dynavox Dynastation 2 Is it me or is this rediculous? A $6000 CDP based on the PS1 system? Does anything justify the price? What is so appealing about the PS1 sound anyways? pic of the dynastation

I'm contemplating picking up a Transporter (which I can get a discount on), but would consider other options up to $1400 (to then use with a Squeezebox). All my music is streamed and it would be to the Extreme Platinum and/or srm-007t in my sig. Any other DACs you would recommend? Had the DA10 recently, and while I liked its signature, looking for something new.

Continuation from THIS thread. Thanks! The noise floor/pops/clicks has nothing to do with the actual rig. The noise floor/pops/clicks mainly depend on your cart and the quality of the vinyl. The vinyl in this case was good at best. FAR from mint. I have to go out right now, but later I will post some examples of mint vinyl on a very high-end rig and some cheap poor man's rig. One clip was transferred on an $18,000.00 turntable. One was done on a used $35.00 turntable and $80.00 cart. The others were transferred on complete rigs that cost $2,000.00 at most. Which is which? All of the vinyl was either mint or near mint. This is why I think some vin…

Now that both the Wavelength Cosecant USB DAC v3 (now with ASYNC mode) and the Benchmark USB DAC 1 and DAC 1-PRE support 24-bit audio at sample rates up to 96 kHz without the installation of any drivers or other special software. I am having a hard time choosing between them. My primary headphones are the Ultrasone UE 9 and the Grado GS 1000. Has anyone out there heard both side to side at any of the meets??? Are there specific advantages of one over the other? Why did Benchmark choose not to implement the asynchronous mode of USB ? Is this really a better way to go? There is a big price diff between the two and the Benchmark gives you a preamp and headphone amps to…

If you had only 1 good, well made power cable (Better then the stock ones) would you use it on a DAC or Amp? Im thinking DAC, as my Amp (HR millett) is using the Astrodyne PS, which prob will not benefit from the cable. I dunno, im new to the whole AC power cable, so i bought a starter (Virtual Dynamic basic) for one of my devices, just dont know which.

Well my Northstar M192 MKII arrived today, took a little while to start using it though as I was having problems with my Squeezebox. So for now I'm using it with the EMU 0404 USB via foobar and ASIO output. I'm using the rca outputs till my new balanced cables from Nate arrive . I'll post pics later but here's some early impressions: detail retrival is good resolution and extension are very good tonality seems pretty accurate soundstage (especially depth) are excellent That's about it for now I'll add more as time goes on. Hi-rez pics here 1280x1024 pics are attached below

As promised here are some pics of the first reference level CDP Sony ever made, well one half of it. Released in 1987 it's built to a standard Sony can only dream off today with solid copper panels and huge transformers for it's meager 25w draw.

Looking to get a second, decent, <US$1K universal player. Looking at: Marantz Oppo Arcam Denon Pioneer ...which others should I be looking at, and why? Looking to buy new, as the ridiculous amount of technology turnover makes it worrisome that components (especially the transport) will too quickly become irreplaceable. Oppo strikes me as the one to beat -- with an external DAC for redbook -- anyone have any serious contenders? I'd really like to think that the Marantz changer (VC6001) is pretty good, and is tempting if for no other reason than for its ability to play multiple disks.

I'll put up unresized images either when I can access my FTP or when Head-Case makes the switch to the new forum software.

I'm considering getting a cheap cd player/transport so I can conveniently put on discs without the need to rip them first. I would be feeding (probably) the toslink to my miniDAC and from there balanced out to my Beta22. The player would need to sound at least as good as the ripped CD's do when fed from my H120s' toslink out. The player doesn't need to be portable and the only format it will need to play are redbook standard CD's. I've tried using my cheap technics system but that is thin and tinny compared to my H120. Are there players that fit this bill ? I will be saving up for a Cambridge Audio 840C in my future but as this will likely take until the winter…

Yes, no, maybe?

Well it's finally arrived after sitting at APL since December waiting for the 32bit upgrade. I'm not terribly bothered though as it arrived in one piece, the whole 20kgs. The unit is still warming up but first impressions are very positive though the whole system is stone cold so I might have a better idea tonight. Right now I'm listening to the SACD Dire Straits - Brothers in Arms and it is flat out stunning. The sound is just like it's from a great electrostatic, hanging in space and inviting you to take a listen. The first thing I did was to rip it open to inspect any shipping damage so I'll leave you with some internal porn... …

Anyone know if the TBAAM (Turtle Beach Audio Advantage Micro) optical out is bit perfect on Linux with ALSA? Is ALSA/Linux a bit-perfect system to use? (like Kernel Streaming on Windows) I know the TBAAM optical on Windows is resampled, but what about Linux?

http://www.dagogo.com/CambridgeAzur840C.html "That

I'd like to get a dac to pair with my recently acquired O2/KGSS rig. I'm currently using my APL modded Philips SACD1000 but there's a pretty big portion of music that I only have on hard drives. I'd like to keep this as inexpensive as possible but if I can't find anything to my liking I'm willing to wait it out awhile. I'll mostly likely be using the DAC with a Squeezebox as the transport.

http://www.musicdirect.com/product/73106 Am I correct in assuming that I can connect a turntable and headphones to this phono amp and be able to use it without my reciever connected? If so, what are your opinions of it based on sq or value, or is there someting better that would allow me to do the same thing. I do wish it was MC instead of MM but oh well. I have an old Dual 721 that I wouldn't mind moving to my office, but really don't want to have to deal with the reciever and speakers in there also. Thanks

Hi all. Since I'm getting in the Cambridge 840C, I was wondering what type of cable should I get for connecting the my 840c to my laptop? The 840C has coax and my laptop has S/PDIF 1/8". I haven't done this before as I'm guessing that I could connect my laptop or Ipod to the 840C and use the DAC in the 840c? I was thinking about getting Blue Jeans to make a cable to do this. What would you folks recommend. Thanks in advance .

So my Yamaha PF-800 turntable showed up today. It is indeed in near mint condition. The best example I've yet seen. I've only just unpacked it and put it together, so no sonic impressions yet. I do think I'll leave this one stock, as I rather like the Black "Lord Vader" look. More to follow on this TT.

I'm still doing research as to what type of hirez player I want. While a universal unit would be cool, the fact is that I have tons of SACDs but only a handful of DVD-A's. So in addition to universal (modded) units, I am considering stock SACD players. I see the Marantz SA-11S1 and Krell SACD Standard mentioned quite a bit, but have not really heard anything about their performance from anyone whose opinion I trust. So give me your opinions, people I trust! Anyone ever own or hear or know someone who has owned or heard one of these players? Or even better, are there any other SACD only players you'd like to recommend? My price range is <$2000, and I want something that…

Well hell has frozen over, the cubs have won the world series, George Bush has said something clever, I will be buying an iMac. All patently unlikely a few short months ago but I will most likely be buying an iMac to do multipurpose duty in our kitchen dining area. One of its duties will be to act as the server for squeezcenter. I am currently running squeezcenter 7.0 on my laptop but it will need to be out and about most of the summer so I need a more permanent solution. Is anyone running squeezcenter on a MAC? Any glitches or problems? Thanks.