Do It Yourself

I've just stumbled across this http://www.st-andrews.ac.uk/~www_pa/Scots_Guide/audio/Analog.html are there other sites of a similar intent that you can recommend. (This is to save me trawling through threads at HF. )

So I set up my lathe last night, and was itchin' to get to it today. I had a piece of East India Rosewood hanging around in the shop, and with nothing really in mind set out to make some wood chips. What I ended up with will probably end up as a post for a multi headphone stand, most likely with 4 hangers attached to a hub mounted to the top of the post and a round thick base at the bottom.

What can I use to get rid of nasty sticker/tape goo residue without harming a nice surface? The item in question is the VAC-1 (VDA-2, VHP-2, whatever) and I'm talking about the nice smooth finish on the front plate.

hi all! I was wondering if anyone here would be willing to turn a wood motor pod for a project I am working on. I have a custom aluminum plate that I'd like to press fit into a simple, wood cylinder that would include a cutout for the motor itself that would run right down the middle. The outside diameter would be 120mm and the height would be just enough to accommodate my Nottingham turntable, so 4-5". If anyone is interested, I can supply detailed drawings for the top plate and we can talk price Thanks!

Has anyone tried to better this thing ? Any ideas?

DIY Gods, I'm trying to find out if there are any good but not excessively expensive 3-way rotary speaker output selector switches available that any of you DIYers may know about. I'll also want a regular 3-way rotary input selector switch but have no idea which are decent and which are crap. My plan is to eventually integrate a Stax transformer, headphone transformer and regular speaker outs in an amp and want to have a nice big selector knob for them. That way I can have one integrated amp that can run anything I'm ever likely to own and have ample power to drive any and all difficult loads. Any recommendations?

We have lots of info on good parts, but I can't seem to find good tools. I don't mean multimeters and soldering irons, I mean the guys that do the hard work but go unnoticed, like helping hands and wire strippers. In my experience, the standard helping hands thing from PartsExpress is a little flimsier than I'd like, and I don't know how to determine a good wire stripper since I only have the one from a group buy with not enough sizes. Feel free to throw in whatever cool tools you like too, because what is a man without his tools?

just curious, has anyone tried using other tubes in the Blue Hawaii than the 6CA7/EL34? I ended up with a set of boards, and was looking at some datasheets over the weekend. I started looking at the 6BG6GE, 3D21A/WB/7403, 12E1, EL360, 6146, etc.... I started looking more at the 3D21A, but noted that the one major concern is that the transconductance is about half that of the EL34 which means that the gain will probably be about 6dB lower than the EL34, and depending on headroom in the cathode drive circuit this could result in significantly higher distortion. (Also, I might not get enough voltage swing without making other changes that would raise the source impedance …

Greetings. I recently bought a used Sennheiser HD600 from a friend for practically nothing more than a song, knowing it had problems with the cable on the right side. There is intermittent continuity, so the audio keeps cutting out if the cable is moved just so. I know there are several manufacturers that make replacement cables such as Clou and Cardas, but I don't feel like spending CAD$200 on -wire- right now. (yes, some of you will call me insane for not immediately picking up the Cardas or Clou cable. Well to that I say phthptftphfftt!!! ) Anyways, I was wondering if anyone knows where to get the seemingly proprietary connectors that Sennheiser uses in their headphon…

Someone has emailed me looking for someone to build a regulated 12v power supply that will work in france, along with the cable to make an apogee AD500 work from it. I can provide contact information, etc.

In the past I've liked Neutrik's connectors best for RCA, but I haven't tried anything more boutique, yet. When it comes to binding posts, I'm pretty clueless on what is quality and what isn't. What is everyones' favorites?

So what are you currently working on? Researching for your next wallet buster? I just ordered all the parts for a SOHA, and I am comtemplating a M^3.

Interesting thread that has popped up from some recent controversy in Stereophile surround the Halco amps. A few heavy-weights are in on this discussion, so it should be interesting! http://www.diyaudio.com/forums/showthread.php?s=&postid=1404200

with that video of a home made tube going round these days... (and it turns out that guy was someone i worked with back in the midwest hifi days 30 years ago) I figured i would show a picture of a tube i made by hand in 1976 (at zenith) Has a couple of bugs in it. (actually a bug and a butterfly) http://gilmore.chem.northwestern.edu/tube1.jpg http://gilmore.chem.northwestern.edu/tube2.jpg Proving without a doubt that i was nuttier, longer than just about anyone. (made from picture tube necks)

scroll down for video

I did a front panel and i want to order a case with it. I opened the order program and selected the Housing Profile 1. It only allows me to define the length. Does that mean FPE will follow the width and height of my front panel? Is that the true price of the casing? Anyone tell me how to get the case? I'm exploring my options. I have lots of solid wood and i was thinking of casing my b22 with it but im worried about the heat dissipation. I've been putting the casework off for a long time and i want to finish it before the bijou comes.

Im making this for my friend who is deaf in one ear. Its my first time making one of these and i would like to confirm that the wiring would be as follows IL1 IL2 IG IR1 IR2 on the input side then on the output side would be OL1 OR1 OG OL2 OR2? Sorry to ask such a newbie question but i would really like to make this work for him so that he can enjoy good music.

Has anyone had any experiences with the Furutech FP-682 or FP-681 http://www.thecableco.com/product.php?id=4201 I'm wondering whether the rhodium or gold version of these are any improvement over the Neutrik or Switchcraft alternatives. This is me window shopping connectors for a balanced Beta22.

I'm venturing into cable making and I've found sources for everything I need, except good quality copper wire. What should I look for? Thanks in advance! .

Have any of you that have the IM716, or took advantage of the Buy dot com deal, removed the volume pod and added resistors? The other site has a thread on this but thought I check here as well. I just got in a pair and also have a few resistors hanging around; although, all I have are 75 ohm jobbies from KSC-35 mod craziness. Other than getting rid of the somewhat sizeable pod holding the switch and volume pot, anyone find it worth the effort?

http://cgi.ebay.com/OLD-Fluke-407DR-Plate-Filament-Rack-Tube-Power-Supply_W0QQitemZ160184703511QQihZ006QQcategoryZ58287QQssPageNameZWDVWQQrdZ1QQcmdZViewItem If you have room for this thing...

the output on my Zhaolu is too high. I have had some issues with it in the past, but never that bad. However with my two most recent purchases, a Marantz Sr7001 receiver and a MPX3 SLAM I am running into problems. The Marantz's Peak light shows and the sound gets distorted at times because it can't handle the inputs and I can't turn the volume up past 7 o'clock on my mpx3. I've considered getting some of those RCA adapters to reduce gain by 3db or 6db, but I realize that is not an ideal fix. So does anyone have any experience with the Zhaolu 1.3? Can I change the gain on it?

Well I traded for a pair of ALO jenna cable rewired 701s and of course the left channel is cutting out on me at the earcup. I have a 4 conductor extension that highflyin9 did for me a while back that is totally transparent to me so I thought I would use that cable to rewire these. Ken did a second entry so I am all set up to attempt to wire them balanced but I can't seem to be able to get into the earcup has anyone done these yet. I would stick with the jenna wire but it is all of 5 feet and I need a min of 10ft any help would be appreciated

Hello, this is my first post here. I have Stax SR-303/SRM-313 combo. It works well with my vinyl player but with cd it is cold and boring. Cd (Audio aero prima) is fine with my speakersystem, so I?m not going to change it. I got an idea of DIY tube amp with SR-303. Having read many threads here and the other, now malfunctioning forum, I have found this Gilmores schema: http://headwize.com/projects/gilmore_prj.htm Is this a good schema? What else would you recommend? I won?t make this myself, have to make it by an experienced amp maker, so it can be a relatively complicated amp like that of Gilmores.

I was working on a project this weekend and realized that I had my camera downstairs in my DIY dungeon. It seemed like a good time to take a picture and start a thread like this, I figure no one should be ashamed of what their space looks like after they see mine. That's my nightmare, what's yours?