luvdunhill

Not exactly sure. He said it real quick in passing. I should investigate!

Actually; the new production Silmics are crap. As mentioned by Wayne at Burning Amp this year

I am using 2SJ106/2SK208, BCM61/BCM62, PHPT610030-series. The 2SJ106 is the SMT version of the 2SJ103. The 2SK208 is the SMT version of 2SK246.

I did fix the silk screen on the new ones

cspirou: I would add an input resistor to ground as well. You can match Q1 to Q3 and Q5 to Q7, but I don’t think matching is all that useful here. If you want to try another small SMD buffer, let me know. I have just ordered some boards now that I have verified their performance versus sims. I can include matched Toshiba JFETs and the other dual package BJTs are available at Mouser.

My Intel NUC also has USB-C video output, so all would be good if someone made a switcher

Recently bought an LG Ultrafine 4K Monitor which uses USB-C (one input and three output). I am curious if anyone makes a KVM with -C output (can’t find any) or what the options are to do input switching on this monitor?

So, what do you guys think of my front panel layout? I would like to loose the indicator mark on the knob, but it functions in four positions alternating between the four options on/off for gain (high and low (MC/MM) and rumble filter (on/off). The LEDs are bi color green/red, green is on/MC and red is off/MM. The power LED is always green. Just using the same value resistor for both colors, they seem to be matched somewhat. The LEDs are from Bivar and the circuit uses one common-anode and one common-cathode. Just for Nate, I avoided blue

I can’t unlock my phone without my prescription glasses. Not the answer you are looking for, but I would assume if you train two faces, with and without, it will work just fine.

Happened to me as well. Took a week longer than the original delivery date but it arrived.

$ python -m visa shell Welcome to the VISA shell. Type help or ? to list commands. (visa) list ( 0) GPIB0::16::INSTR ( 1) GPIB0::28::INSTR ( 2) GPIB0::1::INSTR ( 3) ASRL2::INSTR ( 4) ASRL1::INSTR (visa) open 0 GPIB0::16::INSTR has been opened. You can talk to the device using "write", "read" or "query. The default end of message is added to each message (open) query *IDN? Response: KEITHLEY INSTRUMENTS INC.,MODEL 2015,0788786,B09 /A02 (open) close The resource has been closed. (visa) open 2 GPIB0::1::INSTR has been opened. You can talk to the device using "write", "read" or "query. The default end of message is added to each message (open) query *IDN? Response: TEKTRONIX,TDS 3032C,0,CF:91.1CT FV:v4.25 TDS3GV:v1.00 TDS3FFT:v1.00 TDS3TRG:v1.00 (open) close The resource has been closed. (visa) Played around with PyVISA today...

Man I hate casework. I cut this one just a little two close.

Listening is over rated. You need more test gear!!

HC Approved cables FTW!

It’s a good thing Al. Case in point: Old Cohiba band sans holograms - old and antiquated.

No issues with iPhone 6 and current software. I am planning on upgrading, but not because of the software.

Old and antiquated

RyJ Ex4

Sadly, Alexa only locks things for you. She refuses to unlock

Or just put a zip tie under and solder the top side of the board.

Has anyone analyzed how much capacitance after the GRLV is too much? I would be a bit wary of putting it in a separate enclosure away from its load...

Generally, is there enough “drive” in these “scientific” oscillators to input directly into consumer-grade HiFi? I also would need 10MHz for my Esoteric and would love to try one of these out, maybe you have an extra?

One just doesn’t “ignore” Team 5-pin.