July 12, 201015 yr My prettiest Lenco thus far. Dust cover not installed yet. Other picture- nearly 4" of bubble wrap around the plinth/motor section. About as much on the dust cover packed in a separate box.
July 12, 201015 yr now all you need is De Wood to build you a plinth and you are all set oh plus a modern arm... I have heard that the stock 75s sound great but the updated ones sound superb almost the equal of the 301/401 How are you liking the idler sound
July 12, 201015 yr now all you need is De Wood to build you a plinth and you are all set oh plus a modern arm... I have heard that the stock 75s sound great but the updated ones sound superb almost the equal of the 301/401 How are you liking the idler sound Hard to gauge the sound quality in a stock configuration because the tonearm is quite primitive. Once modded I am a big fan of idlers. I think I should be able to do the plinth by myself, the mods are well documented, but someone else would have to do the finish. Contacting Dr Wood is another good idea numbs .I'm not sure what to go for as far as tonearm (budget under $1000 used, Moerch?) I like the Graham Phantom and Tri-Planar but they are out of my budget at the moment.
July 12, 201015 yr I am using a AT-1005mk2 which I really like, but the Moerch is a good choice. Depends really on the cartridge I guess. Played with the new RB301 this weekend and am not a huge fan... from the new mounting style to the goofy anti-skate adjustment, to the rough finish on the headshell. I prefer the older design.
July 12, 201015 yr I'm thinking about trying a Transfiguration Axia. Has anyone heard it? While I have no direct experience Dan from Blackbird Audio loves them. Please skip Fell (sp) audio as Bill is a tool.
July 12, 201015 yr I am using a AT-1005mk2 which I really like, but the Moerch is a good choice. Depends really on the cartridge I guess. Played with the new RB301 this weekend and am not a huge fan... from the new mounting style to the goofy anti-skate adjustment, to the rough finish on the headshell. I prefer the older design. My thinking might be off here- but I wasn't thinking of getting a high mass tonearm since medium mass tonearms seem to go well with a wider variety of modern cartridges. Maybe I just need to hear a "vintage" design cartridge I like, but so far it seems like I'm a Dynavector and Zyx type of person. Edited July 12, 201015 yr by deepak
July 12, 201015 yr While I have no direct experience Dan from Blackbird Audio loves them. Please skip Fell (sp) audio as Bill is a tool. I think you mean Audiofeil International :: Welcome, pronounced Audio Fail.
July 13, 201015 yr The yokeless concept (either single or double ring) is an interesting one, and a better technical solution than the conventional MC design, and perhaps better than the unconventional designs (those being ZYX and Miyajima). I'll probably try one out at some point.
July 13, 201015 yr Nice deepak! This one here is flippin gorgeous, but way overpriced IMO... Lenco L75 Heirloom For Sale | AudiogoN
July 13, 201015 yr Nice deepak! This one here is flippin gorgeous, but way overpriced IMO... Lenco L75 Heirloom For Sale | AudiogoN It's SOLD so I cannot see the price, but damn is that sexy.
July 14, 201015 yr Nice deepak! This one here is flippin gorgeous, but way overpriced IMO... Lenco L75 Heirloom For Sale | AudiogoN Three armboards, that is hot!
July 14, 201015 yr Craigslist FTW. Vinylengine It weighs 37 pounds. Thats not so bad except that its mounted at shoulder level The arm seems like it will be a good match for a Grado or other medium-high compliance cart which is perfect since there is a DL-s1 in route and I have a bunch of Grados.
August 3, 201015 yr Dang, looks like a good find. Have you opened it up yet? And do you prefer low mass tonearms + higher compliance carts? Speaking of CL, this could be kind of interesting: JVC SRC-900 Vintage Idler Wheel Turntable That, or complete junk. Thoughts?
August 3, 201015 yr I know exactly which Jungle Book he's talking about, I grew up on that too (although I didn't grow up on the picture disk). But..."He Poos Clouds"?
August 3, 201015 yr I know exactly which Jungle Book he's talking about, I grew up on that too (although I didn't grow up on the picture disk). But..."He Poos Clouds"? He Poos Clouds - Wikipedia, the free encyclopedia
August 3, 201015 yr Poor Stretch And it was very inhuman of the roommate to give away his LPs. There's also a Mitsu LT-22 FS on CL. Must resist.
August 3, 201015 yr got the repairs done on the OL Sovreign compleed and the motor and motor control unit are now on their way back to me!!! Vinyl in about a week.
August 4, 201015 yr My vinyl rig is down now also: Getting a Mike New 14lb Platter heavy duty bearing with stiffener plate and new heavy copper armboard When its all done it should be fairly substantial. Also building a new power supply using this hi-perf module as the basis from Paul Hynes
August 4, 201015 yr I know exactly which Jungle Book he's talking about, I grew up on that too (although I didn't grow up on the picture disk). But..."He Poos Clouds"? I have He Poos Clouds on vinyl too, although I got it from Zanth in the xmas exchange not from a crate by the side of the road. got the repairs done on the OL Sovreign compleed and the motor and motor control unit are now on their way back to me!!! Vinyl in about a week. :jbl: Sound like some cool mods, Pete. Let us know the results.
August 7, 201015 yr Dang, looks like a good find. Have you opened it up yet? And do you prefer low mass tonearms + higher compliance carts? I have not opened it, and don't plan to I downloaded the FSM from vinylengine, and it is way too hardcore. This TT sounds really good with the DL-s1 I just got. It took very little effort (align, set VTF, set antiskate) to get a nice 3-d soundstage. Im quite happy. Has anyone experimented with inverting opamps for 0-ohm input impedance with MC carts? I combined the front end of the RJM phonoclone link with the Passive-riaa opamp phonostage like he describes HERE and am quite happy with the results. Im still up in the air whether I prefer my SUT or this.
August 7, 201015 yr I'm still interested in trying Peter Daniel's phono stage, but no one has offered input on it 70 db of gain with my DL-103 would be great for my TVC. Without a SUT the Denon/Pearl is unusable in my speaker setup
August 7, 201015 yr I'm still interested in trying Peter Daniel's phono stage, but no one has offered input on it 70 db of gain with my DL-103 would be great for my TVC. Without a SUT the Denon/Pearl is unusable in my speaker setup Why not add some Cinemags to the Pearl?
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now