Headphones

link On-ear. (Largely) closed. (Largely) black. Leather (& aluminum). Detachable, non-microphonic cord with mic and remote for, e.g., Apple products. Not electrostatic. $300. No, I'm not getting them, I have enough headphones, I'm not getting them, I have enough headphones, I'm not getting them, I have enough headphones, I'm not getting them, I have enough headphones... But, dang, I'm curious.

Has any one purchased one of these? If so what are your impressions?

So after two long years of service, the cable above the left ear bud of my E500's has cracked. Because it is outside the two year limited warranty, I was wondering if it would be worth looking for someone to recable them or to send them to sure and pay for the repair. For anyone who has sent their 'phones into Shure beyond the 2 year mark... did you have to pay a $145 service fee as listed on their website? (http://www.shure.com/stellent/groups/public/@gms_gmi_web_us_pa/documents/web_resource/us_pa_doc_service_fees.pdf) Or is it likely that the repair or switch (by most accounts that's what they do) will cost less than that?

First off, hello everyone, Recently I was doing a Re-cable on my AKG K-701's and I regrettably made a vital mistake and twisted the signal post on one of my drivers, snapping the small copper wire. Dejected with my horrible mistake I went of on a search for a proper AKG support line, much to my surprise every number I called resulted in no ringing for an extremely long period of time on any of the lines I attempted to contact them from (818 numbers). So naturally, the first thing I did was assume I should just email them, so I came across a gentlemen named Frank Rodriguez (frank dot rodriguez at harman dot com) whom was the "Customer Service Administrator". So I did, a…

Looks just like the K550 except with the quickly-becoming-ubiquitous iOS microphone-&-remote in the cable. PDF

Anyone balance their Edition 9s and if so any comments on the change from SE? My balanced experience is pretty limited to the Senn line where there is a decent change.

This is a picture of Richard Dorfmeister, one half of the famous Kruder & Dorfmeister, and Tosca. Any idea what cans he's wearing in this picture?

Can't wait to see measurements. I mean for a fucking suit to match.

Kind of interesting. No sense of what they will sound like, but the project is a go at this point. https://www.kickstarter.com/projects/plpl/rock-hard-canadian-maple-headphones?ref=thanks

Now here is something that has been out for a while but I've never really looked into. Now these carry a wide variety of names and there is a plethora of models but they are all pretty much the same, hybrid units with an electret driver to cover the top end and a regular dynamic driver for the rest of the spectrum. I decided it was time to look into this so I bought two units, the Mitchell and Johnson GL2 and some Cyberdrive unit for 30$ which looked the same as the GL2 minus the wood. The GL2 arrived first so some pics: Here the baffle which shows how the drivers are setup Small transformer and 10uf/50V NP cap are all there is to this and th…

A couple of years ago I purchased a pair of Sony MDR-7520 professional studio headphones costing circa £300. Last week I dropped them and the plastic mount on the headband snapped. I contacted Sony spares to arrange for the to be repaired and was told to call their service agent CVP. CVP told me a complete new headband was required... the cost? A STAGGERING £576! £230 for "parts" and two hours labour + VAT. When I queried it I was told that was the price and there was nothing I could do, but they offered to sell me a new pair! To compound the stupidity of this quote, it is the SAME headband as used on the MDR-7510 which has different drivers and sells …

Is it good? How does it stand against the other big boys? It's the only highend headphone besides the Qualia that I haven't heard yet and I'm very curious about it. I'm thinking of getting either that or the L3000 for a closed headphone with lots of good bass. Thanks, Tao

After some suggestions and requests I decided to listen to the same set of songs, but with the different pads on the MS2i and HF-1s. Right now I'm enjoying the MS2is with flats, but I do like the detail that the bowls provide. Overall the HF-1s are in the middle of the two MS2is with the different pads (bowls and flats). It was fun doing this comparison. Thanks to everyone for their suggestions and insights. It is much appreciated. Equipment Denon 2900 - DAC1 - PPX3 SLAM - MS2i Playlist: 1. Jack Johnson - Better Together 2. Taj Mahal/Toumani Diabate - Queen Bee 3. Eric Clapton - Tears in Heaven (unplugged) 4. Diana Krall Live - East of the Sun, West of t…

I had no idea I was a headphone snob but now I know it's official. While listening to my new MS2i heaphones the most elitist and snobby thoughts about my HD650's kept going though my head. My headphone upgrading path started with a pair of Grado SR80's > Sr325's > HD650's shortly followed by a zu mobius cable now 3 years after my HD650's a wild hair caused my to buy a pair of MS2i's. At first I really liked the grado line, that is, until I first heard a pair of HD600's. After that first listen my grados began to sound unbearable. The highs were just too much for me. A few months later, after I had saved the money, I finally bought a pair of HD650's. I loved …

I just got an email from NSL: Ultrasone Headphones

So I've been looking for a solid pair of earphones (under $100), not in-ear phones (they feel like Q-tips to me), and not headphones....just something like those earphones that come with your Ipod but sound much better. Now I can obviously see why stores won't let you test them, because who'd want to wear a pair that's been in 100's of people's ears? That being said I come to you, and look for some advice on a good pair you'd recommend. Quick info: • I listen to a lot of classic rock/ballads, not sure if this helps recommend a pair? • I am not a fan of bass, the whole thump-thump sounds people obsess over isn't something I care for much. I like the sounds t…

Just lost my Vsonic GR02 Bass Edition ☹️?And can't find it anywhere to buy as it seems they don't make them anymore....So i need help choosing a new IEM's.Is there something that sounds good like the GR02 BE? for the 60$ price range?

Could anyone point out the precise differences between the Stax SR-202 and the SR-303? I understand that the difference between the '303 and '404 is only the cable, but I was wondering what about the '202? I have read something about it somewhere (how's that for being vague.. . Maybe in the Stax thread), but I am unable to trace it back. Thanks for the help!

While my O2 was off getting a new cable and pads installed, HighEnd Workshop in the UK did a fantasic by the way and cost less than Yamasinc including shipping, I started looking at dynamics/orthos that have come out since 2006. Now with the O2 back on my head I just don't see a rival coming along I started with the Concerto, ya ya I know, and the HE-5LE. Nice for a dynamic rig but no. Brought in the Senn 800... no. Beta22... no. Still holding out for the LCD-2, maybe T1 but whats the joke? Off topic, something finally made its way to between two pins on one of the output transistors of my KGSS and burnt/arced for a while and left a nice ding in the top layer …

Hey, does anyone know where I can get a Stax Pro cable so I can recable my ESP-950's? Also, I have tried to find detailed info on the process of doing the mod. Does anyone have any links to info on this? Thanks.

Interested in these, but would like to demo a pair. Any suggestions, or anyone here have a pair they would loan me for a week or two?

I think the W5000 and the HP-2 are very pretty. I also think the GS1K is a very attractive headphone, even with those big ass bagels.

http://www.stax.co.jp/Pdf/Export/SR007MK2-brochure-s.pdf http://cls.audiogon.com/cgi-bin/cls.pl?spkrfull&1200056430 Is this the new and improved SR007? Has anyone auditioned the new SR007? Is this a new model?

After two years of development time has come. In a few weeks he will go into production. look http://www.open-end-...read.php?t=4455 Jürg Jecklin and Manfred Stein worked 2 years to achieve this goal: The implementation of the specified standard. And thus to achieve the improvement in all respects to the old Jecklin Float. We will see: In a few weeks of this interesting headphones are available in series. The JJ Float QA is manufactured in Germany with Quad Musikwiedergabe. http://www.quad-musik.de/

Hi, this sounds like a knowledge community sharing the same interest thats why I decided to come here, this my first hello to you. Going to the point I bough first and MS1, and to me doesn't sound near to what I would call decent hi.fi so I decided to go with the RS1 and the same happened. There was an improvement but not much. But this is straight from a 20$ Creative Stone Plus Mp3 Player and laptop. I ordered a minimax and gamma 2 when bought the rs1, the amp arrived but waiting for the dac to use it. The rs1 at least with crappy source doesn't make for me it just sounds 2 cheap speakers (sorry grado fans) . So I'm preparing my self for the eventuality of th…