Speakers

I currently have a yamaha M80 amp that I found on craigslist for 150 bucks but I've been getting the itch to upgrade. I have no experience with speakers and don't know what a decent budget amp for magnaplanar speakers would be. What would you recommend?

Like a maroon, I'm getting the itch to ditch my highly enjoyable and convenient active Quads for some passive P3ESRs. This means I'll need an outboard amp, which is going to be a tight fit on my already-overloaded desk. So I guess I'm looking for suggestions on amps that are modestly sized and modestly powered and might have modest synergy with the Harbeths -- which are a 6 ohm load and 84dB sensitive and will be used in the very nearfield. There are a couple of Class D options which obviously fit the form factor -- Headroom, Bel Canto S300 -- but I'm not sure about the sonics. An Aleph 3 would work, but might just burn its way through to freedom. I nearly pulled th…

Has anyone heard of/heard these? They seem to be getting glowing reviews and look pretty interesting overall - powered sub w/ ribbon tweeter setup. Also not that expensive, at $3k for a pair of the triton two's. http://www.goldenear.com/products/triton-towers

I've loved my Outlaw Audio 1050 receiver, but it was time for something new. I thought about Denon again, but after the terrible experience with Denon service, I figured I'd be better off avoiding them. And considering my efforts to show something resembling fiscal responsibility, I was looking at lower-end Denon pieces which were very ugly uninspired. So I checked out HK stuff for the first time in years. I had an AVR 25 back in college and liked it. I was looking at the AVR 140 or 240 at the lower end of their line. They're pretty-well discound at Circuit City right now, so I figured I'd swing by and check them out. They're better looking in person than I expected…

linkage If TKAM or any mods want to post the HC amazon link for them here feel free.

What do you guys think about Zu's? Specifically the Druid mk IV? I'm thinking of picking-up a pair used for around $1600... I briefly heard them at a dealer and really liked what I heard, but they were being driven by a big solid state amp (even though they're very sensitive)... I plan on driving them with a 2 watt decware SET amp. Thanks, mjb

I have the Abbys, and have been scouting around for subs off and on ever since. The Bailey sub almost never comes up for sale at a good used price, and though I know I could pick up a perfectly good sub for less, since the Bailey was made for the Abbys and is a beautiful match, I'm hopeful. I might be shooting myself in the foot by playing price games with the seller, but so far, he's been responsive. Anyway, as I await the next email, here's a pic of what I hope will be mine (as if posting it will make it come true). My modest speaker set up will finally be complete (for now): Exemplar Denon 2900>SP Extreme Platinum>FirstWatt F1>Abbys/Bailey.

so fucking happy right now even with the t amp at 15% they can fill up my office beautifully. was skeptical about the 1.8 watt decware amp but all reservations have been removed. yes i know the drivers are mounted sideways but theres a brace directly behind the driver and thats the only way the driver would go in without damage to driver posts. i did about 15% of the work in building them. rather happy with the outcome. the guys who built them did a beautiful job. pictures dont really shop the texture all that well.

I got to hear a pair of these at a nearby hifi dealer today. Associated equipment: Esoteric CDP (looks like the SA-60, I forgot to take down the model) Anthem D6 (surround processor acting as preamp) Anthem Statement P2 power amp Thiel CS2.4 in standard finish, grills on. It took me about 15 minutes to get used to the presentation. I was sitting about 10 feet away in a 22x18 room, no real room treatments from what I saw. Anybody local to MA/NH it was at Ensemble hifi in the middle showroom. In this room I preferred the speakers facing forward. At first I wasn't too impressed with them, but like I said after I got adjusted to their presentation I started to lik…

As part of the renovation of my house, I moved some the cabinets in my kitchen, and there's no longer room for the hutch on my computer desk. Said hutch has held my ancient-but-beloved EV Sentry studio monitors for years. I can't set the EVs on the desk because they're not magnetically shielded in the slightest. I'm in the market for some replacements, cost $500-1,500. That's a big range I realize, but house repairs have uh, complicated my financial situation, and I'm unsure how much I'll be able to spend. I'm leaning toward unpowered, unless there's a great deal on powered monitors in that price range. I used a Hafler P125 (60WPC) to drive the EVs, but I also hav…

Are these a good buy at 380 used? I'm actually trying to save up for the HD800 but speakers have been on my mind recently. I probably won't be able to preorder if I get these but that gives me time to see the reviews I guess. Since a lot of you have experience, could I get some information on how it will sound compared with the HD600/W5000? I'm running them out of flac/Musichall CD25, Northstar M192 and Gilmore Lite with DPS. thanks

My brother just moved and needs some speakers. He's not really deep into audio, but does like to listen to music. Budget is around 500

Well, my Harmon Kardon AVR 85 is giving up the ghost faster than I had hoped. Since I have the Smyth Research Realiser and plan to use that inline with pre outs from a surround processor to speaker amps (not for awhile, may end up with active monitors mainly in the future), I am focusing on separates now. No need for amp(s) yet, just the front end processing. HDMI switching is not a priority for me at all, since my TV has 4 HDMI inputs, and I'm only using one right now. So, I have plenty of room for expansion. I also plan on eventually giving in and getting an Oppo BDP-83, which from what I hear has excellent onboard decoding of lossless high res audio (DD True…

I recently moved my speakers into the living room to be used with our TV so we can open up the room I had been using as the listening room. With no HT in the future, I

So finally accepting the fact that I'm a bass head, I've decided to pair a sub with my 22Ls. While it'd be cool to get the Quad L-sub and have a matching set, reviews of the L-sub say it lacks the lowest bass frequencies. I would be devastated if I paid $1000 for a heavy ass sub and it didn't reproduce low bass effectively, so I've decided to go with SVS and save some money at the same time. Room size is 13 x 10, ceiling height just under 8'. As you can imagine, floor space is at a minimum. My 22Ls are 18" from the side wall and 24" from the back wall. So, while I could possibly squeeze the PB12-NSD in the corner behind the speakers, it would be a tight squeeze,…

Hi, I am behind about 4 years, but apparently these are nice speakers. The lowthers have a new home, and the quads should be a nice fit. At one point there was a dealer that a lot of you guys went through for a nice price, that I can't remember, but if you had another source, let me know.

Well the speaker bug has bit again, I just couldn't pass up on a deal I saw for a demo pair of these: They are Selah Audio 3D's. http://selahaudio.com/id134.html

From another thread: How about speaker amps, are there any speaker amps that follow this design? How about preamps? Is there a corresponding solid state design? Perhaps with MOSFETs?

I was very tempted to buy Audio GD Master 10 integrated amplifier, I know that Audio GD makes incredible stuff at low prices, Master 10 is 250w/8ohm in class A/B...but, searching in the web, I found this integrated amplifier: Dussun R30 This is the description and specifications of the amplifier: The R30 beside others in its design offers the following highlights: High precise volume control in 0.1dB steps with left and right channel fine-synchronized: Considering the volume control device is one of the souls of an amplifier, R30 employes a DUSSUN- developed volume control device, which set up by a …

Ok, I'm not an audiophile, won't pretend to be either. My main interest is computing but the obsession tends to spread like a virus from high end computers, to desks, chairs, and audio. Many years back, when I wanted a decent computer sound system, I ended up with the reasonable $400 VideoLogic Sirocco Crossfires. These served me well and I've never really had any major complaints with the actual sound, but a few years into them I stopped using the rear speakers and subwoofer all together as I found my needs and tastes changing (the rears are no longer connected, the sub is, but the control for it is turned 95% of the way down). Then somewhere along the line, a great d…

I am in the market for a set of speakers. I have very quickly become overwhelmed and could use suggestions. The room these will go in is ~14' x 31' with 9 foot ceilings. It is open to a room that is 14' x 20', so effectively the room is 14' x 51'. For various reasons, they probably need to be placed along the short wall, That wall has windows over most of it, and a large radiator under the window. This means that the speakers cannot be closer than about 18" to the wall. Additionally, the corners are not accessible, so corner horns won't work. I plan on driving these with a push-pull 300B tube amp (~30W Class A). These amps can drive about anything (they are not SE…

Well, since my living situation will be changing soon, I thought now might be a good time to start contemplating a speaker rig. I'm not sure of the living arrangement yet, but anticipate a typical 2 bedroom apartment for at least a year. My intention would be to use the Opus 21 as source, and the Zana can serve as a preamp. I know very little about speakers/amplification, so given a modest budget of $1000 for speakers/amp, what would you all suggest I look into?

Has anyone used Herbie's Big Fat Dots with their loudspeakers? Any impressions?

While I'm not typically a fan of single-driver speakers this caught my eye today. I've had really good experiences with Seas Excel series of drivers in the past so who knows this could actually be good.

Hi everyone. One of my tweeters for my 400i PSB speakers is blown out. I was wondering where a good place would be to try and find a replacement tweeter. I honestly never did try and find a replacement tweeter before so this is new territory for me. I sent an email to PSB in hopes of purchasing one from them if they have one, which seems unlikely after doing some research on the net. I put a WTB ad in audiokarma as well. It seems that a website called Madisound Speaker Components | Assisting speaker builders for more than 25 years. used to sell the replacement, but they don't offer it anymore. I will try and call my local authorized PSB dealer to see if they do…