July 13, 201115 yr comment_457872 If you put this one together by yourself, I would have to say bravo. Very well done. You've probably checked the lines from PS to amp until you have them memorized, no doubt Report
July 13, 201115 yr comment_457874 You've probably checked the lines from PS to amp until you have them memorized, no doubt We are definitely going to do this very thoroughly. In the first build, wires got crossed The wiring work was certainly a chore, this time I did a lot more. Report
July 13, 201115 yr comment_457876 Awesome. Soon you'll be the first person to have two DIYT2 in his possession! Report
July 14, 201115 yr comment_457911 Nice work sir! Best of luck to you during the first power up... Report
July 14, 201115 yr comment_457953 Hallelujah!! Here is our work shed. The amp is making music. I did say a serious prayer before I turned it on Report
July 14, 201115 yr comment_457962 Looks great, Andy. Yours should be the first one up and running with the revised boards. Seems like the most straight-forward build among others (maybe except Dr. Gilmore's) so far Report
July 14, 201115 yr comment_457965 Andy's experience proves it: the DIYT2 is a straightforward build that will maybe turn up a single error, that can be fixed within a few hours. Clearly, any newbie can tackle one, no sweat! On a more serious note, I can never tire of looking at these beautiful amps. Congrats on your build! Edited July 14, 201115 yr by El_Doug Report
July 14, 201115 yr comment_457989 Hallelujah!! The amp is making music. I did say a serious prayer before I turned it on You, Sir, are winning at life. Congratulations! Report
July 14, 201115 yr comment_457993 Its the coffee that andy drinks that allows him to do this. Seriously Report
July 14, 201115 yr comment_458012 Great work Andy. You are making me very jealous with your 2 x T2DIY's. There are many out there who would sell their soul for just one! So is this the first up and running T2DIY with Lil Knight's updated boards? Edited July 14, 201115 yr by Horio Report
July 14, 201115 yr comment_458014 Thanks all. Lil Knight said it is the first rev2 board up. I think a lot of the other people have to deal with case work, which I am so glad I did not. I'll stick a scope on it to make sure there are no oscillations. Report
July 14, 201115 yr comment_458020 I'll stick a scope on it to make sure there are no oscillations. Cool! I'd look at both the power rails and the outputs at full power. I've found that you need a decent bandwidth scope to do this though. Post the traces once you get around to it Report
July 14, 201115 yr comment_458041 Put a crappy little scope on the output and it looks great. Sorry Marc, my friend who we borrowed the good scope from fried a channel so no pics. Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.