2sa1968 from BDent showed up today. Look genuine.

Edited September 6, 201114 yr by wink

I looked for this components in Future Electronics some days ago and I don't found them, for these reason I need somebody in USA to buy these components for me or the grup buy if anybody want these IXTPs.

-- o --

Rodrigo

I looked for this components in Future Electronics some days ago and I don't found them, for these reason I need somebody in USA to buy these components for me or the grup buy if anybody want these IXTPs.

-- o --

Rodrigo

I might be be able to help, but it will have to be next week at the earliest. Too bad you guys cannot distribute some chinchon dulce anis to me

FYI

2SA1413 (Z) / 2SC3632 (Z) = TO-251 (TO-252) version of the 2SA1486 / 2SC3840.

Edited September 6, 201114 yr by Inu

I might be be able to help, but it will have to be next week at the earliest. Too bad you guys cannot distribute some chinchon dulce anis to me

Why not? Customs block to foreign spirits?

Why not? Customs block to foreign spirits?

Yup, that's what I've been told.. I can get the Seco here, nice stuff, but had a bad experience with the Marie Brizard Anisette, very very sweet stuff and am looking for something else.

Sorry, otherwise I would get you any bottle of whatever anís you want. Chinchón ones are good, seco is mildly dry, and dulce is just a bit drier than Marie Brizard. If you want it stronger, you have "seco especial" which is 74%vol (absinthe like), "extra seco" at 50-55% vol.

Another good Spanish Anís is Machaquito, which has two types, "seco" at 55%vol and "dulce" 35%vol. I'd say Machaquito seco is one of my favorites, but if you like this kind of strong spirits, you may wish to try some Galician "orujo" or even a well made "pacharán" (or patxarán in the Basque Country) which uses orujo-like liquor flavored with fresh sloes put in for maceration.

I picked up the boards from the PO, will unpack and make sure everything is ok tomorrow night. Will need to find an extra big box for bada bing, n3rdling, KG and deadneddz I could see the suspension in my Civic sag as I placed that box in my boot

Thanks for the update Deepak. I'm really looking forward to warming up the iron for this build.

I might be be able to help, but it will have to be next week at the earliest. Too bad you guys cannot distribute some chinchon dulce anis to me

Many thanks for your offer.

I not sure if the customs allowed to pass spirits but if it's possible send one bottle of orujo, I will send you one for you

-- o --

Rodrigo "from Galicia ;-)"

I picked up the boards from the PO, will unpack and make sure everything is ok tomorrow night. Will need to find an extra big box for bada bing, n3rdling, KG and deadneddz I could see the suspension in my Civic sag as I placed that box in my boot

Thanks for your work.

My paypal was restored today, what a relief!

Rodrigo, I have some spare IXTP from the last group buy. How many pieces do you need?

Got the boards in hand. Thanks again, Lil_Knight!

I only have Hden and my order and it's heavy! You must have gotten quite the work out shipping these all out.

Thanks for your work.

My paypal was restored today, what a relief!

Rodrigo, I have some spare IXTP from the last group buy. How many pieces do you need?

I have 2 KGSSHV kits and I need a minimum of 8 pieces, but if it's possible I would prefer having some spare part, if you can sell me 16 or 20 would be perfect.

Many thanks Tran

-- o --

Rodrigo

PM-ed you.

Kevin Gilmore wrote:

Get yourself one of these

http://www.ebay.com/...=item1c1d98666e

and test all the high voltage transistors before you put them in.

Great suggestion! I didn't know you could get something to characterize transistors for so little money. Ordered one! I had not come across this on eBay in my perusal... thanks for to the OP and to the secondary poster for pointing it out.

Before I actually start this T2 build I've got to finish reading the whole DIY T2 thread- so many things making demands on my time...

PM sent to all 13 people regarding the shipping breakdown. And individual totals sent to kevin gilmore, kerry, morphsci, and horio.

I didn't get a PM. I was on the original list to get a set of KGSSHV boards. Did I fall off?

I didn't get a PM. I was on the original list to get a set of KGSSHV boards. Did I fall off?

You weren't on my list to send boards to.

I didn't get a PM. I was on the original list to get a set of KGSSHV boards. Did I fall off?

I think your name is in my shipment although I have not received it yet. Your number in the spreadsheet is the same as mine.

Yes, that is correct. In the spreadsheet, I put the notes on some bold usernames to state whose boards they will receive and distribute.

Sweet!, I should be receiving the boards shortly.

I has a bunch of those 3kg express post sachels left over from something, I got them for free somehow, I forget.

I'm pretty sure the kgsshv boards will fit into them, but I dunno about the T2 yet.

So if you only ordered the kgsshv and don't mind having it sent by express post, you won't have to pay me for shipping. ^^

edit: woops, I was talking about Team Australia, and this may or may not have supposed to be in the PM lol

Edited September 8, 201114 yr by deadlylover

The t2 boards are so fucking big that mailing them is a right pita.

If that's an auspost satchel I don't think the boards will fit...

When i shipped the T2 boards, i first took 2 x fedex priority envelopes, and put them

on each end of the boards. Then i bought some padded foam envelopes from one

of the business supply stores, put it in there, and shipped them. No problems, all

of them got there in one piece.

All this talk about shipping T2 boards and nobody has posted their size?

It's huge.

407mm x 304mm for the amp board, 254mm x 304mm for the PSU.