Skip to content
View in the app

A better way to browse. Learn more.

www.Head-Case.org

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Speakers

I Can't Hear You, Speaker Man, I'm Listening to My Headphones

  1. I have a shitty insignia receiver that is only rated for 6 ohm speakers according to the manual but a pair of suspiciously cheap ribbon speakers came up on craigslist that I'm probably going to get. The problem is that they have 4 ohms impedance. If I listen at a modest volume will I risk blowing my receiver?

  2. Started by Salt Peanuts,

    So after 3 months, I'm getting bit tired of needing to get up each time I want to change the volume. Assuming some unexpected expenses don't come up, I've been thinking about Adcom GFP-750, maybe in a month or two. Are there anything else I should be looking for? Also, anyone know anything about PS Audio's P-200?

  3. I don't know much on these units. Friend has them already, and he was asking me bout hooking em up. I just didn't want to just say "yes go for it" and find out I did something to mess up the receiver. Receiver: Sansui 9090DB Speakers: JBL Northridge E30 6-Inch Speakers From what I found on the net regarding the sansui, it's And for the speaker, I found I see the max recommended 125 W, and the 8 ohm nominal match up. But then what's the continuous 70watts for? Anything I should be concerned about if I were to help him hook the stuff up? If he wants to try bi-wiring. The speakers got 5 binding posts each, and the amp itself uses the spring clips. It…

  4. Started by Jon L,

    After neglecting my speakers for a while due to my recent electrostat headphone lust, I have put together my speaker rig again after receiving the DIY First Watt F5 amp. My main speakers are actively bi-amped, and I was looking for an extremely resolving amp for tweeter/midrange (Aurum Cantus G3 ribbon/Focal 7K2 midrange) beyond what my tube amps can provide. The F5 is fantabulously beautifully resolved in this range, I must say. BTW. Yes, that is the controversial Storm Audio Pandora DAC, currently used in "Master" mode, slaving my Lynx 2B spdif output from my quiet PC.

  5. Started by Hopstretch,

    I have a couple of bookshelf speakers and a small active sub I'm no longer using in my TV system and I'd like to move them to the living room, which is currently wired with Blose courtesy of the house's previous owner. Anyway, I'm thinking a 50W integrated amp would do the trick (speakers are 8 ohm and 88dB sensitive) and I'd like to be cheap -- as it'd just be for occasional ambience or the kids and the main source will probably be an iPod. Do need a sub out. NAD? Cambridge? Arcam? Fire away. Used is fine.

  6. Started by humanflyz,

    Has anyone had experience with Mirage speakers?

  7. Started by Asr,

    I'm planning on building a 2.0 speaker system for music and movies for a home-theater setup within the next 3-4 months, so I recently started researching speakers, receivers, DVD players, and HDTVs (I'm still creaking by with an analog TV so I'll have to get an HDTV before February next year anyway). Have never really listened to speakers much, but I've been reading various audio mags for a while now so I at least have a general idea & direction. However, I could probably use some general speaker-buying tips, as far as dealers, auditions, and decisions go. As in, would it be acceptable form if I took my Plinius CDP around with me and asked dealers to unseat their s…

  8. Hey guys, Well I am trying to start my research into speakers...again. Last time I went into it kind of half assed, and it actually didn't turn so bad last time. Picked up some moth cicadas that mated with my old moth s2a3 and I thought they were pretty great for the price and the fact they were single drivers - very coherent, beautiful midrange, nice full tone, but obviously lacking the low end registers. I would say down to 50 it was pretty solid. the omega hemps had the bass but they were somewhat sharp on the high end and had nowhere near the midrange magic of the cicadas. Budget is probably under a $1000 (unfortunately). Maybe I could swing a littler highe…

  9. Started by postjack,

    anybody heard it? Better yet, let's go OT: how does everyone feel about monitors + sub in a small room? I'm still craving more bass extension then my Quads want to provide. I'm wondering if something like some iQ1s and sub would satisfy my needs.

  10. AudiogoN ForSale: Bohlender Graebener Radia X3 These are some very good speakers... especially for the asking price. I can't honestly think of anything better for the price.

  11. Started by skace,

    Ok, I'm not an audiophile, won't pretend to be either. My main interest is computing but the obsession tends to spread like a virus from high end computers, to desks, chairs, and audio. Many years back, when I wanted a decent computer sound system, I ended up with the reasonable $400 VideoLogic Sirocco Crossfires. These served me well and I've never really had any major complaints with the actual sound, but a few years into them I stopped using the rear speakers and subwoofer all together as I found my needs and tastes changing (the rears are no longer connected, the sub is, but the control for it is turned 95% of the way down). Then somewhere along the line, a great d…

  12. Started by Knuckledragger,

    As part of the renovation of my house, I moved some the cabinets in my kitchen, and there's no longer room for the hutch on my computer desk. Said hutch has held my ancient-but-beloved EV Sentry studio monitors for years. I can't set the EVs on the desk because they're not magnetically shielded in the slightest. I'm in the market for some replacements, cost $500-1,500. That's a big range I realize, but house repairs have uh, complicated my financial situation, and I'm unsure how much I'll be able to spend. I'm leaning toward unpowered, unless there's a great deal on powered monitors in that price range. I used a Hafler P125 (60WPC) to drive the EVs, but I also hav…

  13. Started by iceman94,

    I'm looking for speaker amps for a pair of 92 dB, 8-12 ohm speakers, AudioKinesis Jazz Modules. So far what I've been looking at has been anywhere from 8 to ~50 watts, although I guess I'm shooting for the 16-30 watt range. I'd like to get your guys' recommendations on brands/amps to look into. Right now, any price range is fine- I'll narrow it down later. This is for a home system for next year, but I'm antsy and like planning ahead. In particular, I'm interested in any cool-running amps in this range. All I've come up with so far are the Red Wine stuff and Resolution S30 (part of the Opus system). I don't know what livable heat output levels would be, and want a back…

  14. I am thinking between the headroom harbeth and avi ADM9 now but i know for sure that i won't have a chance to audition them. Therefore, everyone here is my only hope can anyone tell me which one is better? thanks

  15. Started by jinp6301,

    Everything from the source (minus computer if you're using one) to the amps to the speakers, what would you get?

  16. Started by shinichi,

    hi , can anyone recommend me an used excellent speaker for pc(my sound card has xlr balance, rca analog,...)? so far i only know the quad 12l active is good for pc(for the qual 12l2 , i think it won't let me use with pc). can anyone recommend me some speakers which are above level of quad 12l active? my budget for speaker pc will be around 1.5k for a used one thanks

  17. From another thread: How about speaker amps, are there any speaker amps that follow this design? How about preamps? Is there a corresponding solid state design? Perhaps with MOSFETs?

  18. Started by barmar46,

    What components do you need in the chain between the cd player and the speakers themselves to drive them and give them volume control? What brands to you recommend and why? ( Price point under $1500; goal involving, full, dynamic, relsoving sound-not too bright or edgy, yet not rollled off on highs, mids well present but not over stated, bass, foundational, but not dominant, boomy or muddy, just tight. Listen to acoustic singer emphsis and jazz. Transparency and immediacy critical. (posted something like this on Source site referring to dac issue and didn't get response.)

    • 1 reply
    • 3.8k views
  19. Started by postjack,

    Anyone ever heard Dali speakers before? A positive review of the Ikon 6 in HiFi News a few months back, as well as an interview with the owner of the company in a more recent issue, has me interested in their products.

    • 7 replies
    • 3.4k views
  20. Started by Fitz,

    I have a bit of a dilemma with the audio rig at my desk. I had been using a pair of Acoustic Research AR4x's that I pulled out of a dumpster, but with my new monitor there isn't enough room for them to fit properly. I need to get some new bookshelf speakers that are 7" wide or smaller, and don't require a subwoofer crossed over way high to avoid sounding thin. I have no idea what's good on the market right now, which is made even harder to figure out due to the size constraint. So if anybody happens to know some nice speakers that are that small, I'd be very grateful for the advice.

  21. Started by Absorbine_Sr,

    Well, since my living situation will be changing soon, I thought now might be a good time to start contemplating a speaker rig. I'm not sure of the living arrangement yet, but anticipate a typical 2 bedroom apartment for at least a year. My intention would be to use the Opus 21 as source, and the Zana can serve as a preamp. I know very little about speakers/amplification, so given a modest budget of $1000 for speakers/amp, what would you all suggest I look into?

  22. Started by JimP,

    OK picked up a pair of Harbeth P3ES-2 locally at a decent price. Hooked up to my old Bryston B60R integrated (60wpc 8ohm) fed by 840c (spinning CDs and also fed optically by a macmini). I need to cook this in for awhile, but damn it sounds really nice. Listening to Beck/Sea Change now in nearfield mode. I'm really enjoying the freedom from headphone strapped to my head (of course, if I'm going to rock out with my ___ out, I still reach for the headphones so as not to disturb the household). I still have an Omega sat/sub system on order to mate with my Almarro flea power amp for a setup in a different room. I may be done with headphones -- keep 2 or 3, otherwise they…

  23. Anyone here know cheap speaker cables with small/skinny spade plugs? My McIntosh 2100 has tiny speaker taps (there's a pic of it around here somewhere) and most spades won't come close to fitting, unfortunately.

    • 9 replies
    • 2.4k views
  24. Started by fierce_freak,

    Which is better in a bang-for-buck sense? Actives really appeal to me, but the inner-"audiophool" contests that passive will always be better quality. Thoughts?

    • 36 replies
    • 6.6k views
  25. Started by mulveling,

    I have the occasional mono vinyl, and they invariably sound like crap on stereo headphones or speakers. You get a wonderful stereo image of all the noise crud on the record's surface, while the music is a lifeless dead-center image. There also may be some sort of smearing from two speakers (that can never be exactly the same) trying to reproduce the same signal. Not long ago I heard a local fellow's pure mono setup, the speaker was a gigantic 50's or 60's Bozak cabinet with multiple drivers. The sound was very surprising, and extremely enjoyable. I'm not sure if you need the same kind of speakers to capture most of the magic, but since then I've been looking at my unu…

    • 15 replies
    • 3.1k views

Important Information

By using this site, you agree to our Terms of Use.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.