February 25, 201511 yr comment_674321 Yep, sure. But maybe somebody has an unused set or some spares I can make disappear. Report
February 26, 201511 yr comment_674408 I could have been more precise I have some. Asking $1000 each. Report
February 26, 201511 yr comment_674445 Not bad for unobtanium. I would expect higher prices * matched at Iq=0, Tc=my cold grubby hands Report
February 27, 201511 yr comment_674634 When you need a break, Biggie, you have a new option in town: https://www.facebook.com/mikkeller/posts/984351641575848 Report
February 27, 201511 yr Author comment_674637 That's pretty much on the same street as the bakery. Report
February 28, 201511 yr comment_674694 No wonder those transistors are hard to get... Birgir bought them all! Edited February 28, 201511 yr by eggil Report
February 28, 201511 yr Author comment_674730 Well at least they are in good hands. I've spent a lot of money of on out of production sand in the last year though... a lot!!! Report
March 21, 201511 yr comment_677960 Anybody have a spare board set? Anybody thinking of running a new board set? Report
March 21, 201511 yr comment_677997 I don't have a spare set, but I'm in if there's another group buy. Especially if they're as nice as the previous run. 4oz copper, wasn't it? Report
March 29, 201511 yr comment_679053 I found a source for a board set thanks, ordered the silicon (DAMN THAT HURT BAD), Penny and Giles pot (already numb from the silicon), and transformers. All the major parts. KGST smoke test today, KGSSHV in a month, Megatron about 3 months out, T2 by end of year. Report
March 30, 201511 yr comment_679204 Great and ambitious lineup ! I'm also stocking things for this beast, but being a slow builder it's going to take several months... I'm gathering mods ant tips in the thread for now. Edited March 30, 201511 yr by G600 Report
April 11, 201511 yr comment_680831 Hrm any hot tips for good feet for the original kevin gilmore chassis? Report
April 11, 201511 yr comment_680871 I used some small vintage feet. No idea of part number. Justin's rubber feet are probably way to big, besides which the hole size is too small. Report
April 13, 201511 yr comment_681134 I see some people asking for boards. I have a set I might be willing to let go from an old GB run. pm me if you're interested. Report
April 14, 201511 yr comment_681162 I have a quote for 4 sets of PS and Amp boards, I need one, three (only) more participants and I'll do the run. Blue board 92 mil board thickness (thick but not too thick) 2 oz trace I got them to come down a bit on the cost, it's now $314/set + tax and shipping. On this one I'll eat some of the cost and joiners can get them for $300 + shipping to them. I've got quotes from other sources and they're coming in more expensive, such as $280/board. Edit: This rev of the board (known to work) Here's the AMP board http://instantdfm.bayareacircuits.com/dfmquote/txm5x3d9/results/ PM me if interested. I also have an unusual/rare board I can't use, it's for standard off the shelf 400mm heat sink, is .125 thick with gold mask, if anybody is interested ($240 shipped) Taken Edited April 18, 201511 yr by Earspeakers Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.