Headphones

I saw these UE 10s on eBay two days ago. And thought if i could have UE in Irvine, about 35 minutes from my house, take my ear impressions then they could make customs to perfectly fit my ears and this might be a good deal. so i called UE customer service and to my surprise UE said no can do. a few hours later i called back and asked, if i am an original UE10 owner and two or three years later my ear canal changes as a result of wearing them, age, or gaining or losing weight would UE recast in the event they no longer provided a secure fit. again, the UE rep said no. she explained the recasting process could possibly damage the drivers. i am still a bit surprised-…

What's considered a good price for these? I've seen them going for upwards of $300 and I've found some for about $150. Is that a decent price?

Over at HF there is a mod for the Denon D2000/D5000 that is supposed to make them... (HF Topic) I'm not quite sure what to to make of this; he sounds pretty rational describing the mod. On the other hand he talks of vast differences after changing the phones' cables (and burning them in), which i tend to doubt. Has someone of you heard this 'spectacular' mod yet?

In many threads concerning electrostats I come cross opinions that "you must get used to the electrostatic sound" and suchlike... Now I'm in a process of exploring my new Omegas. So can anyone explain what are the peculiarities that we must get used to?

What are your L3000 burn-in experiences? I have a pair that's being extremely stubborn, though truthfully part of it is my laziness. It's my second pair; bought it a while ago (3 years?). It's been mostly in storage, but I figure it must have at least 250 hours from my previous half-hearted burn-in attempts. It STILL has that new-L3000 sound (mostly). I know that sound because it's exactly what Purk's pair sounded like when new. It's got the L3000 signature for sure, but the effortlessness and holographic imaging aren't there yet, like on my older pair (bought used from Japan) and Purk's pair. Sounds a bit too "rigid" like the full musical flow isn't quite there yet. It'…

I have the K701s and i'd read on this forum that there are some with 2 foam pad layers and some with one. I was wondering if there might be any way to tell which one I have without tinkering, using the serial number or something (I don't want to tinker for fear of irreversible damage)

It's probably no surprise to some of you that these are some of my favorite headphones (when properly damped and housed). I'd like to hear the impressions of others that have heard these unique drivers.

I'd appreciate impressions from those of you who have heard a balanced HF-1 compared to a balanced RS-2 or RS-1. Basically, I'm trying to decide if I want to move on from my HF-1.

Hello, I just would like to know your opinion: which headphones are better Sennheiser PX100 or Sennheiser PX200. Also, what is the difference between Authentic Sennheiser PX200 and Faulty ones? How to notice a difference? Please, help me... I have already ordered PX200 and I am not sure if they are authentic Thanks

The other place has been awash of inane useless drivel lately. http://www.head-fi.org/forums/f4/who-likes-new-headphone-smell-296771/ The only post worth reading was Wayne's sarcastic reply, but it seems this is the only crap being posted lately. Granted there doesn't seem to be a ton of useful headphone info posted here every day, but at least the threads have some value, even if only for their bull whip sharp sarcastic wit.

Yuck, its like the soundstage collapsed or something...I much prefer the bowls in all aspects (don't hurt me please). Anyways, I'm really quite impressed with the RS1s after running the whole gamut of commonly recommended headphones on HF. Weird thing is, I use to own a pair of SR225s and they became extremely uncomfortable after 30 minutes, but the RS1s I can wear for any length of time without my ears throbbing. I'd say they're more comfortable than my pair of HD580s because of less clamping force and possibly due to the weight differential. The comfort factor is certainly contrary to my expectations and a pleasant one at that. This is the first time I've felt mo…

This is really getting out of hand. http://www.head-fi.org/forums/f4/k701s-here-294171/ <-- Check Post #10 I think K701s need almost 700 hours to be fully burned in...I'm at around 800 hours and it's a huge change of soundstage + impact + smoothness + detail compared to 200 hours or so... Some said they need more like 1200 hrs for it to be fully burned in - I can see why, it just keeps improving and improving. I just need to improve my source from iAudio X5L 30G FLAC (shudder).

Well I do. This is a lower serial # pair which I got for recable. After recabling them I spent some time doing tests on the stock cable and I must say Sony really screwed up here. 0.9ohm for the channels and 0.6ohm on ground. The ground is a shield running through covering a PVC covered wire. Looking at the wire itself since the insulation is clear allows me to see the stock wire is all oxidized! So in short. Cheap thin wire pulled in through tubing and then sleeved with black material. Good job Sony on such a nice high end headphone. Here is an after picture: More pictures here: http://apuresound.com/images/cables/v3/r10/ Say what you will, but I am disa…

I was thinking about getting a good vintage AKG, and it seems the K500 is able to sound very good. It doesn't seem to have the Sextett has on headfi, but it still seems better sounding than K501 or K701, and in need of less amplification. What do you guys think?

Suggestions for closed headphones Please~? I am looking for "airy*" sounding closed cans to use at work. I have heard the A900, 950LTD and did not quite like'em. I owned the L3K and liked them, but those are somewhat out of budget for this project. W5000 are maybe a possibility (although the last time I heard them was so long ago that my recollection may be completely wrong....). Any other closed cans that should be considered? Suggestions and comments are sought and most welcomed! Thanks! *by this I mean clean highs and sweet midrange

Alright, you know me -- black is beautiful. So what should my short list be? Besides the O2's, which I will be getting at some point, just because they're black. Second best? I think it's a toss-up -- until I get my customized DT880, I won't know for sure, but at some point, I'm going to go through all the options and buy one. There would still be two places that it isn't black -- the cover, and the personalizable tabs. Either that, or the Audio Technica A950Ltd. I already have that one, so I'll probably keep both.

Thanks for reminding me: Crystalroc blings up Sennheiser headphones.

Anyone?

So I just read Darth Nut's review of the O2s, and wow, it is without a doubt the best review of a piece of audio equipment I have ever read, hands down, no contest. What really blows my mind is how conceptually clear the review was. He basically articulated a coherent conceptual framework for audio review and applied it to an actual piece of audio equipment in a consistent, logical manner and backed it up with supporting evidence. It combines both his subjective perceptual experiences and his concepts in a way that shows the reader his thought process. Honestly this should be required reading for anyone interested in describing audio equipments.

Anybody own these? $158 recable for a set of $25 cans. I'm not being skeptical or facetious, I really am curious on the differences.

In a nutshell, I want a pico but I don't have a lot of stuff so perhaps there is something that I should buy before the Pico. I feel that I don't have a good enough source, or perhaps my amp isn't good enough. Spending $500 on a pico should give me a significant difference since it is a combination of both right? If I didn't buy the pico, I would've probably gotten a DENON DCD-CX3 SACD/CD player or a Yamamoto HA-02 to compliment my ATH-W1000.. Honestly, I'm very fickle and after taking the plunge at IEMs, Tomahawk, and that fricken ALO Cable... I felt that the money and time I spent into these wasn't spent wisely. I want to make a right, or if not.. a good pur…

I tend to go between an ER4P/S and the Senn 600s. Was in a music store today and noticed that they carried these Beyers. Anyone have any experience with either or would they recommend one or the other based on my current listening experiences? They were both $239

Hi everyone, I just came across this sub-culture, dark side of Head-Fi site. Great to be here. Im a firm beleiver in the Godly qualities of the GS1k. However I do feel that the whole Ultrasone thing is just slightly wacked. Flame away

Well, it seems AKG has updated some of their mid-level phones. I just bought my K271 couple of months ago, too. http://www.akg.com/site/press_center/powerslave,id,152,nodeid,0,_language,EN,nodeid,33.html

My earphones suddenly made a cracking sound and afterwards it did not produce sound. Why??? Those earphone were expensive. (In my opinion.) Why did it happen anyway?