Headphones

argh! i just posted an interest check on h43d-f1 and i have no idea what their going rates are can anyone else help me out here? granted, i was probably being a bit optimistic with some of my prices but i think some people are getting a bit shocked i dare say abusive, as i mentioned i don't know their rates (sellers usually blank out their prices so this kills me) so can anyone else help me out? K501 mint DT531 mint w/ papers K240 sextett in good condition, w/box HD580 with HD600 grilles, HD650 cables 2 spare head cushions, 1 set of foam disks and a set of left/right fork thingies grado hf-1 mint w/ box and papers, 2 sets of HD414 pads, flat pads and headp…

Hi guys ! As you may know, I've always wanted a pair of HP2 but never got around to purchase them. I got my SR100 with HP1000 drivers and I'm wondering if I should sell them to fund a HP2 or just build a ~$1500 rig around my SR100 and wait till I have even more money to buy the HP2 without selling the SR100, I have always kept only the best headphone and sold the worst but in this case, it's harder to sell such a nice rare piece of gear that is the SR100. Any thoughts ?!

I just got these in today after I got a good deal on eBay. I'm really surprised by how good these sound. It was hard to find information on these, but it seems they were released a few years ago (in 2003/2004). This is the japanese info page: http://www.audio-technica.co.jp/products/hp/pc/atc-ha4usb.html I was just wondering if anyone else had come across these in their audio journey? If I can make the NE mini-meet, I'd be happy to bring em along.

I've had my TakeTs for not quite a month now. Truth be told, I've barely listened to them. When they arrived from the Land of the Rising Sun, I was in the middle of major house renovations, and I had a houseguest. When I finally connected them up, I found then amusing, but there was a lot lacking with the sound (like the entire midrange.) I heard potential, but mostly I heard what was wrong with the gear upstream of the H2/TR2. This afternoon, I got back my old Halfer P125 power amp. Back in the 90s, it used to drive studio monitors, but it's been a dust collector for the last five years. I haven't heard it in ages, but what I remember was that it imbued small speaker…

A few days I placed an order for a pair of Super Freqs on a whim after stumbling across their website. Hard to pass up custom fit 3 driver IEMs for $189.99 Two days later the kit arrives. In side the box is two impression kits, pair of gloves, return labels and postage as well as instructions. About 18 minutes later the impressions are done and ready to be sent back. now back to waiting.....

As seen on H-F today: http://www.sennheiser.com/sennheiser/icm_eng.nsf/root/press_releases_07.01.2008 http://www.sennheiser.com/sennheiser/icm_eng.nsf/root/press_releases__07.01.2008 http://www.sennheiser.com/sennheiser/icm_eng.nsf/root/press_releases__07.01.2008_ Seems as if the awaited new top of the line model isn't here yet. I wonder if they'll have a surprise at CES? They seem to be following the IEM trend, so I wonder if they are even interested in a 'new' 650. If the 650 is doing well, my mess with it?

I received a surprise package from Enigma Audio. I ordered three balanced cables some time ago, but I asked them to postpone shipping them to me until I had a balanced amp. Since my balanced amp is caught inside the SinglePower black hole space-time continuum, I forgot about these balanced headphone cables. When I saw the package, I thought that the box was a little big for a couple of ECC83 tubes, which I've been ordering recently. Surprise, surprise, upon opening the box I see the silver-gray anti-static bags with the Enigma Audio sticker. Fortunately, I hadn't forgotten what Enigma Audio was. I'm expecting to forget about what "SinglePower" is in a couple more mo…

i need some cans with good soundstage. other needs: -neutral -natural -detailed, high resolution -transparent/good transients with great sounding drums -prat -would like it to be closed (PL750?) but is not a necessity if it really does limit the soundstage and other needs -price (HD580?) these would be paired with either a CK-K3 amp or SOHA amp with a GE 6680 tube and maybe jisbos (would this be enough?) OR i can try to get into entry level STAX. from what i've heard, the new series(303, 202) are more neutral, more airy/soundstage, but maybe a bit of a high mid emphasis compared to the Lambdas and SR-X/MK3. where would i look for these? i can't read yahoo …

This topic has been moved to Speakers. [iurl=http://www.head-case.org/index.php?topic=2958.0]http://www.head-case.org/index.php?topic=2958.0[/iurl] edit: this topic was split because of the speaker discussion, now moved to the speaker forum.

I had no idea I was a headphone snob but now I know it's official. While listening to my new MS2i heaphones the most elitist and snobby thoughts about my HD650's kept going though my head. My headphone upgrading path started with a pair of Grado SR80's > Sr325's > HD650's shortly followed by a zu mobius cable now 3 years after my HD650's a wild hair caused my to buy a pair of MS2i's. At first I really liked the grado line, that is, until I first heard a pair of HD600's. After that first listen my grados began to sound unbearable. The highs were just too much for me. A few months later, after I had saved the money, I finally bought a pair of HD650's. I loved …

Lots of folks put HF-1 drivers and 325i drivers into custom turned wood enclosures. Anyone ever do this with RS-1 drivers? Would be expensive, since essentially you would have to purchase an RS-1 just to cut the drivers out of the already-attractive wooden enclosure. But people have done stranger things in this hobby. Anyway, I'm just curious as to how RS-1 drivers would sound in a deeper wooden enclosure.

First of all, while typing this, I have a strange urge to jump out of the window while stabbing and choking myself at the same time. Why? Because I really think that I am not posting this in the correct sub-forum or even the right website. I browsed through this website and all the forums (the music one looks brilliant) and not only does the front page have a welcoming "I VOMIT ON GOD'S CHILD" on it ( ) but I also couldn`t see any similar request threads. So, yeah, here is my apology in case I am a complete douchebag. So, to the point. I am looking for some good headphones and by headphones I mean big ones like these, not little ones that go into your ears. Also: *…

One of my favorite websites happens to have an article that's headphone related: Link

Still enjoying my Hd580 wired for direct balanced out from XLR out of my miniDAC, find it useful to move around from room to room in the house. Couple of questions: 1. You always see threads about HD580/600/650 used in this manner to good effect - just curious, any other headphones that respond well to running direct XLR out of these type of DACs? 2. Typical full-size HP's terminate in 1/4" plugs - are there such extenders that are female 1/4" (to plug the normal headphone into) to 2 x 3 pin XLR (to connect direct to DAC)? 3. Would like to try balanced on my k271s. It has detachable mini XLR at headphone end. Possible to replace this with balanced cables that go …

After getting myself a pair of Jecklin Floats Model I needed to restore these: Before and after: Since I put another cable on them as well (Mogami 2893), I wanted to do a quick and easy test. I pulled the DIY Charlize out of the rack, added the PS1 as the player and hooked the Float up to the speaker out. While I have to say that there was some ground noise, this whole combo really rocks! David Bowie "The Man Who Sold The World" has been described as "Hard-Rock" but I never heard it this hard rocking! Before the Float was all Highs, Bass was there but not really coming to the fore. With the proper pads and the new cable the Float I is one of…

I'm thinking about picking up a pair of these or MS2i headphones. The problem is that I have never read anything on the MS Pro. Have any of you auditioned them? What were they like?

I was wondering what headphone cable length would be ideal for a home setup. My logic tells me that shorter is better, since it will limit the total cable capacitance. Of course it needs to be long enough to not be inconvenient and flexibility also plays an important role. Let's just assume that I'd use a balanced version of Alex' V3 cable. Assuming an audio rack setup next to a medium sized desk I would think that a 6' cable would be enough for regular use, and then an extension cable could be used for when you want to sit in the couch and use your cans for nighttime TV watching. I might've missed some common usage scenarios, but this is what I could think of o…

What do you think the best headphones for the Christmas Holiday season are? I'd say the GS1000.

Just bought these on HF. Wondering if anyone has any experience with these. They are the darker wood (obviously) and have no serial #. Also, these look to be pretty glossy..think they were refinished or something?

I like my HF-1. Running balanced has given them some additional smoothness and horizontal extension. But I'm not in love with them. What do you folks think about the move to the RS-2 or RS-1? Would you consider those a significant step up?

Hey all, So, a friend of mine needs some headphones that he will be plugging in to the 1/8" jack on his TV for quiet listening at night. Requirements: Must cost around $40 CDN. Closed 1/8" jack preferable circumaural preferable not complete shit That is about it. If anyone has any recommendations, let me know. Thanks, Jay

Pick these up from a fine gent from head-fi. I had a similar set previously that I had to sell to raise some emergency funds. I felt guilty as soon as I did, and luckily was able to find another set. This pair is different, one being the black grado wooden box, and the slightly gold lettering on the L and R (the picture does a bad job of showing it). The cups are absolutely beautiful, and the font is really classy looking. Sound, for some reason these babies sound not only tolerable, but really nice with bowls. I could never listen to the bowls with RS-1's even my last vintage set, but these with bowls they still have great bass with nice smooth highs, and absolutely no h…

I received my APureSound ER4P cable yesterday from Alex. Ever since the cable on my ER4P began cutting in and out, I had been thinking about whether I should go for [AK]Zip's cable (costs about the same as the Ety itself) or send it to Etymotic for repair (said to be $50). After hearing APureSound recabled KSC75 at a recent meet, I became convinced that it was worth it. I had no question about the workmanship as Alex is well regarded. My trepidation was about the degree of improvements that would be achieved. My only complaint about the ER4P/S sound was that it can sound a tad thin at times, and it seemed that Alex's cable would address this. Enough blabbering, on with…

Guys, Anyone wants to give this a try? IMO, you can mod a headphone to have a tighter bass and a more natural high but you can't improve the midrange,details, and soundstaging. What do you think? Can the modification be as good as claimed? MarkL has an interesting check on his pair of R10.

This topic has been moved to Off Topic. [iurl]http://www.head-case.org/index.php?topic=2782.0[/iurl]