March 21, 20206 yr comment_819611 i would like to get in the group buy. for me please: 4x GRHVxxx 2x GRLV79xx 2x GRLV78xx 2x Main Board 2x miniT2 - bare boards. Report
March 21, 20206 yr comment_819615 @mwl168, can you adjust my order to move from 4 pre-assembled GVHVxxx to 2 pre-assembed and 2 bare? on your spreadsheet: 2, 2, 2, 2, 2, 1 Thanks Report
March 22, 20206 yr comment_819661 Please add the following to my order: 1x PSU main board 1x GRLV78 1x GRLV79 2x GRHVxxx (bare PCB) Report
March 23, 20206 yr comment_819721 Could I be added with the following:4x GRHVxxx - partially populated2x GRLV79xx 2x GRLV78xx 2x Main Board 1x miniT2Cheers, Report
March 23, 20206 yr Author comment_819758 Table updated. Please do double check and let me know if I have made mistakes. I will tally up the final board counts and get quotes from the fab house. I will then update the table with board costs and the total due for each participant and start collecting payments. I will place the order when all payments are collected. Please note the payment will include boards cost and shipping charge from the fab house to me (shipping evenly distributed to each board) but will not include shipping charge from me to you. The following participants are dropped from this GB due to no response: Marc Edwards stickyjon23 zumac99 Edited March 23, 20206 yr by mwl168 Report
March 23, 20206 yr comment_819772 2 hours ago, mwl168 said: Table updated. Please do double check and let me know if I have made mistakes.... This: "Dear Michael, increase my GRLV78 XX, GRLV79xx numbers to 3 each from 2, please! Thanks!!" Report
March 23, 20206 yr comment_819775 Dear Michael, Please add one more main board for me. So, the new total is 4 main boards. The rest are correct. Many thanks. Wachara C. Report
March 23, 20206 yr comment_819780 Could you increase my GRHVxxx bare PCB from 6 to 10? Otherwise I'm good. Thanks! Report
March 24, 20206 yr comment_819837 How many of these boards are needed for a mini t2 build? I would like to get it for 1 mini t2 and potentially a psu for 1 kgsshv carbon Bare with me as im pretty new to the ES amp building. Report
March 24, 20206 yr comment_819851 Michael, Could you revise my order to just 5x mini-T2 and no psu? My friend backed out so I think 5 is enough for me. Thanks again! Report
March 24, 20206 yr Author comment_819875 14 hours ago, boinger said: How many of these boards are needed for a mini t2 build? I would like to get it for 1 mini t2 and potentially a psu for 1 kgsshv carbon Bare with me as im pretty new to the ES amp building. For a complete PSU, you need 2 GRHVxxx, 1 each GRLV78xx, GRLV79xx and the PSU main board. GRLV78/79 can be replaced with 7815\7915 regulators. Each mini T2 set includes a left channel and right channel board for a complete amp. With due respect, with high, lethal voltage, SMD, etc., this is not a good project for a beginner to take on. Please also read through this thread and the mini T2 and KGSSHV build threads for information. Table updated. Edited March 24, 20206 yr by mwl168 Report
March 25, 20206 yr comment_819955 I'd like to add 1 78xx 1 79xx 1 mainboard to my order (effectively 3 psu sets total) Thanks! Report
March 25, 20206 yr Author comment_819956 Table updated. Construction notes for those getting started to source parts for your builds: R3 and R2 determine the regulated voltage for GRLV. The formula is Vout = (R2 + R3)/R3 * Vref. Vref is the reference voltage of U4 (LT1021). R7, R8, R9, R10 determine the regulated voltage for GRHV. The formula is Vout = ((R8 +R9 + R10)/R7 + 1) * Vref. Vref is the reference voltage of IC1 (LT1021). You want to keep R8, R9 R10 values close so they have even voltage drop across each of them. On the PSU Main board, R22 (100K) and C17 (470uf) set up the delay time for HV. The 100k/470uf combination provides a roughly 45 seconds delay. Increase R22 or C17 to increase the delay time. C17 needs to be rated 5VDC or higher. Also added these construction notes in the first post for ease of access. Edited March 25, 20206 yr by mwl168 Report
March 26, 20206 yr comment_820016 I have built a beta 22 and sigma 22 amps from amb. I have also repaired my blue Hawaii several times with live circuits for testing. I am just new to electrostatic amp construction from scratch. So I would love guidance. Having said that. I will take a full set for a mini t2 and psu. Plus a full psu. Report
March 26, 20206 yr comment_820029 2 hours ago, boinger said: I have built a beta 22 and sigma 22 amps from amb. I have also repaired my blue Hawaii several times with live circuits for testing. I am just new to electrostatic amp construction from scratch. So I would love guidance. Having said that. I will take a full set for a mini t2 and psu. Plus a full psu. boinger, You will need to specify which boards and how many. Also, if you want bare or partially assembled GRHVxxx boards. That way, there will be no confusion. Good luck! Edited March 26, 20206 yr by Blueman2 Report
March 26, 20206 yr comment_820030 1 mini t2 set 4 grhv 2 each GRLV78xx, 2 GRLV79xx 2 PSU main board That should give me 2 full psu sets correct and 1 mini t2 amp set? 1 full psu should be good for the kgsshv carbon yes? Report
March 26, 20206 yr comment_820031 7 minutes ago, boinger said: 1 mini t2 set 4 grhv 2 each GRLV78xx, 2 GRLV79xx 2 PSU main board That should give me 2 full psu sets correct and 1 mini t2 amp set? 1 full psu should be good for the kgsshv carbon yes? Yup. Do you want the GRHV partially assembled? Might be worth it if you have not done a lot of SMD work. Report
March 26, 20206 yr comment_820047 Hi mwl168, How the payment is done? Do you have a PayPal account? Regards Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.