February 4, 200917 yr comment_203080 luvdunhill - 8 - 4Asr - 0 - 4Stretch - 0 - 4looser101 - 4 -2PFKMan23 - 0 - 4Naamanf -? - 4Icarium - 0 - 4Dreadhead - 0 - 4n_maher - 4 - 0Digipete - [8-12] - 4 Is this current? Report
February 4, 200917 yr comment_203087 My "?" is because I really don't know what/where I will be in the next couple of months. If I don't have to move I should be able to help out a lot. If this comes down before/during/after my move I won't be able to do much. It would probably be a good idea to do a group buy for all the front and rear panels. Bulk discount plus it will make case work a bit easier. Report
February 4, 200917 yr comment_203089 Naaman, Agreed 100% on the machined panels idea. I was really happy with the service that I got from Cam Expert and it's really a no-brainer if you can supply the material and only have to pay for the fab work. Report
February 4, 200917 yr comment_203093 luvdunhill - 8 - 4Asr - 0 - 4Stretch - 0 - 4looser101 - 4 -2PFKMan23 - 0 - 4Naamanf -? - 4Icarium - 0 - 4Dreadhead - 0 - 4n_maher - 4 - 0Digipete - [8-12] - 4grawk - 4 - 4 Report
February 5, 200917 yr comment_203120 Naaman, Agreed 100% on the machined panels idea. I was really happy with the service that I got from Cam Expert and it's really a no-brainer if you can supply the material and only have to pay for the fab work. Also depending on what people want this thing to do a I/O board with all the back panel connectors PCB mounted could also make production much easier. Report
February 5, 200917 yr comment_203123 Also depending on what people want this thing to do a I/O board with all the back panel connectors PCB mounted could also make production much easier. Sounds good to me, although I not sure I'm ready to offer casework skills since I don't want one. But I could always just send the assembled pcbs to someone else. Report
February 5, 200917 yr Author comment_203133 I'm going to tentatively draw the line at the following: 10 amp chassis 42 part kits 50 boards Time to check the part bin.... er storage closet edit: can someone please check my math / read back through the thread and see if this sounds okay? Report
February 5, 200917 yr comment_203134 Nate, Naaman, Marc & others, any kind of educated guess as to cost of a balanced version? One set of balanced inputs, single 4 pin balanced output...nothing too crazy. Report
February 5, 200917 yr comment_203135 As Nate said, oh frack it: luvdunhill - 8 - 4Asr - 0 - 4Stretch - 0 - 4looser101 - 4 -2PFKMan23 - 0 - 4Naamanf -? - 4Icarium - 0 - 4Dreadhead - 0 - 4n_maher - 4 - 0Digipete - [8-12] - 4Pars - [8-12] - 2 Willing to help build, match parts, etc. Anyone have a BOM for this? I notice one on Headwize done in Google docs, but it seems to need updating (which I can do??). Edited February 5, 200917 yr by Pars Report
February 5, 200917 yr comment_203142 As Nate said, oh frack it: luvdunhill - 8 - 4Asr - 0 - 4Stretch - 0 - 4looser101 - 4 -2PFKMan23 - 0 - 4Naamanf -? - 4Icarium - 0 - 4Dreadhead - 0 - 4n_maher - 4 - 0Digipete - [8-12] - 4Pars - [8-12] - 2 Willing to help build, match parts, etc. Anyone have a BOM for this? I notice one on Headwize done in Google docs, but it seems to need updating (which I can do??). Any reason you left me off? [*]grawk - 4 - 4 I'll want parts, boards, chassis, panels, etc. Report
February 5, 200917 yr comment_203147 Oops, copied wrong post for list: luvdunhill - 8 - 4Asr - 0 - 4Stretch - 0 - 4looser101 - 4 -2PFKMan23 - 0 - 4Naamanf -? - 4Icarium - 0 - 4Dreadhead - 0 - 4n_maher - 4 - 0Digipete - [8-12] - 4grawk - 4 - 4Pars - [8-12] - 2 Report
February 5, 200917 yr Author comment_203155 Nate, Naaman, Marc & others, any kind of educated guess as to cost of a balanced version? One set of balanced inputs, single 4 pin balanced output...nothing too crazy. Maybe $1250-$1500 for 4-channel build? I think we need to work a BOM based on the above quantities and go from there. I will try and get some hard quotes on semiconductors tomorrow. Perhaps Pars can take a crack at the various and sundry other items. DigiPete: What did your Dynamight build cost? I'd say an extra 20% on top of that. Report
February 5, 200917 yr comment_203157 Ok those numbers are bigger than I was expecting for just the parts. I may have to back out. Report
February 5, 200917 yr comment_203169 I am so gonna get one of those cases, a Dynafet will very probably be well out of my pricerange because I do have to ask... very sheepishly. As others have indicated, those of us with no knowledge of such things don't even have a general ball park figure to work from and without some rough guesstimation of cost, it's hard to commit. *edit* Ah, yep that price is well above my threshold. Edited February 5, 200917 yr by Smeggy Report
February 5, 200917 yr comment_203170 Maybe $1250-$1500 for 4-channel build? I think we need to work a BOM based on the above quantities and go from there. I will try and get some hard quotes on semiconductors tomorrow. Perhaps Pars can take a crack at the various and sundry other items. DigiPete: What did your Dynamight build cost? I'd say an extra 20% on top of that. That is well within my budget. I would like a case and all the other group buy frills as well Report
February 5, 200917 yr comment_203171 That estimate is actually quite a bit less than I anticipated. I have no friggin' idea what the heck I'd do with a Dynafet and a Beta22, but the sickness is strong, because I still want one. I'll try my hardest to rechannel that urge into something really sensible like HD 800s. Report
February 5, 200917 yr comment_203176 There is no way that I could feasibly participate or contribute to this, but will watch with GREAT interest Though if there is any scope for me to jump in on IO boards like naamanf made for his B22 builds, I would definitely give that some serious consideration...... Report
February 5, 200917 yr comment_203178 DigiPete: What did your Dynamight build cost? I'd say an extra 20% on top of that. man..... I stopped keeping track... but $800-900 would not be out of the ball park [DIY cost] Report
February 5, 200917 yr Author comment_203179 heh.. I was curious what you'd guys would say to that. Anyways, Pars and I will work offline to come up with part cost. Stay tuned. Report
February 5, 200917 yr comment_203182 Also watching... this is the state of the art, after all. Report
February 5, 200917 yr comment_203185 For those of you getting cold feet -- consider a single-ended version? I'm out, but I have to admit to being very curious how these are going to sound. Report
February 5, 200917 yr comment_203186 man..... I stopped keeping track... but $800-900 would not be out of the ball park [DIY cost] Bad pictures taken during build phase, but shows the scope of what I did Report
February 5, 200917 yr comment_203195 Bad pictures taken during build phase, but shows the scope of what I did Am I the only one not seeing anything? Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.