Do It Yourself

"Description (Gerbers) copper/pcb thicknes": Everything is one channel, and two will be needed for stereo. As for the KGSShv PSU, only the Single Right Skinny is offered: containing one High Voltage rail and a BIAS supply. Those who needs a full supply will need two of those + the Golden Reference Low Voltage. Überamp (Uber1 + Uber2) 4oz/2mm Unbal2bal (Uber3) 3oz/1.6mm Golden Reference Low Voltage (GoldenReference6) 3oz/1.6mm Transconductance Amp (CurrentSourceAmp2) 1.6mm/3oz KGSShv PSU (kgsshvpssicfetsinglenewright), 1.6mm/3oz KGSShv Carbon Amp (Carbonv6), 1.6mm/3oz Grounded Grid (.........) , 1.6mm/3oz (as requested by JoeHpj …

Anybody know the part number for the LEMO connector used in the stock Qualia 010 cable? Thanks.

Can't seem to find any info or examples of these in use, but someone here must have tried them. I have found that buffers on the output of a Muses electronic volume control works very well and had good results with Sjöström Audio diamond buffers but Kevin's little PCB's might be even more compact. Can anyone remember a thread or post where these were introduced? They are a very simple circuit and could possibly do with some extra PSRR with caps right on the power pins, they are so compact I have found a neat way to stack them, in the pics below is a quad channel balanced stack, all the PBCs are connected through the power pins, leaving the i/o's separate. E…

I will have a stock HD650 cable in a week which I was going to use for the connectors. I was going to make a 2.5 meter cable terminated in 2 female XLR plugs. And I was thinking of using silver plated copper, which is pretty easy to find on ebay for cheap in long runs. What I'm concerned about is what gauge should I get? I don't mind a stiff cable as I'm sitting in one spot when I listen, but a bit of flexibility is good too. I was thinking 26 or 28 AWG? In a litz braid up to the Y split

For those who haven't been browsing HF: This is some amazing work! http://www.mundohi-fi.com/portal/index.php?module=pagesetter&func=viewpub&tid=8&pid=8&page=1

I realize this isn't audio related, but I'm in the process of rewiring a bunch of antique lamps. I could use a 50' or 100' spool of lamp 18ga 2-conductor lamp cord. The local hardware store charges 40-80 cents a foot. Any suggestions where I should look online for lamp cord and other parts?

I really don't like the screw terminal blocks much, so I was going to use PCB headers/wire mounted connectors for a couple of projects. I need something in 5.08mm (0.200") or close, and the only ones I have come up with so far are the Hirose HF5 series at Digikey (http://www.hirose.co.jp/cataloge_hp/e67600011.pdf, or the Molex SPOX series at Mouser View List I want something where it is foolproof to take apart and put back together. I need connectors of 2, 3, 4, 6 and 8 pins. Digikey has everything I need. Mouser has everything EXCEPT the 8 pin header (they carry the 8 pin connector... not sure why?). One other question: if I go with the SPOX, you have a choice…

I'm looking to give my headphone cables a more professional look like this http://redsecta.files.wordpress.com/2012/03/650cable.jpg I want to find splitters like this guy used

....so I bought one of these. They popped up on Massdrop while I was talking to Kevin who immediately called BS on this. My curiosity peaked, I had to get one. Here is the product page: https://www.bursonaudio.com/products/supreme-sound-opamp-v5i/ BS meter is tingling so I waited for it to arrive: Nice enough box and here are the internals: I forgot to take a picture of the top but it looks exactly as it did on the page. Here is the bottom though: The potting compound is pretty soft so here is what I found: So... the only thing in there is an opamp with the top markings sanded off and one small cap. There is noth…

I'm taking a Microelectronics lab course and we need to pick a particular not overly complicated circuit we think is interesting that is in the literature to build and test. If necessary, we are allowed to make use of the VLSI fabrication laboratory but have to design the layout ourselves. Any cool ideas people have for this project? Edit: Forgot to say that unless we provide the transistors/opamps/etc ourselves, we are using bog standard parts. 2N390x BJTs and ancient 4007 MOSFETs. Opamps are some newer version of the 1458.

so sorenb really wanted this, so here it is http://gilmore.chem.northwestern.edu/cfaelectrostat.pdf the outputs are 300v darlington transistors just need to find a suitable npn match for the stn9360, and this can be done all surface mount tiny, fully complementary, fully dc coupled, decent input impedance (none of this 75 ohm nonsense) push pull output... edit: PBHV2160ZX looks great for the npn. so you can add one more set of outputs and run up to 500v power supplies balanced input only, and you need 4 of them

Keeping in mind Kevin Gilmore's design rules i have insomnia about stabilizing common mode of JFET input stage without sacrificing CMRR or straight referencing it to the amplifier/source ground. So, check attached schematic. While keeping straightforward signal flow aka "Gilmore's gesign rule" it also have second control loop which helps SuSy amps to maintain output common mode near ground potential.

Saw this somewhere and hadn't recalled ever seeing it before: Switchcraft EH35MMS Switchcraft Just what Justin needs to keep those pesky 6ga ipod docks from breaking jacks

This amp (plus the matching tuner and a Sony reel to teel) has been sitting at my parents house for as long as I can remember, completely untouched. I was finally curious enough to open it up recently and it is really something special in a vintage kind of way, a germanium SS amp with output transformers. I'm not sure how old this is but late 60's would be a good guess. Now it is about the same size as the larger Stax amps so no powerhouse but I'm a bit interested in hearing it. So here is what it looks like on the inside: Here is the back panel, DIN connectors everywhere plus the output transistors: It is a pretty neat layout and the assembly is bri…

I've decided to create a new division of HeadAmp dedicated to offering DIY parts (both in-house made as well as reselling such as transistors). It's just less stressful and overall more enjoyable dealing with DIYers (of course, this is just in addition to selling the HeadAmp made amps/DACs) I'll have to come up with a list of items. So this is a "Wanted" thread. Current items: - Custom machined Teflon Stax Jacks (pro or normal bias)

I'm happy to report that the goldenreference low voltage dual power supply works as designed, and tests less than 1 microvolt of noise. Going to have to take it to work and put it in a screen room to really measure the noise. http://gilmore.chem.northwestern.edu/goldenreferencedual.jpg however there is one silkscreen error seen by the extra + near the 47uf cap on the right side. I will update the files shortly. All 4 of the 47uf caps need to have their plus sides pointing to the left. very happy with this

I was thinking about slapping this together on a breadboard: https://www.fairchildsemi.com/application-notes/AN/AN-6610.pdf The transistors listed (92PU01 / 92PU51) must be ancient as I cannot find them. I ran across somewhat of a datasheet here: http://www.datasheets360.com/part/detail/92pu01/3582415256795608549/?alternatePartManufacturerId=0 It looks like a Fairchild KSD882Y might come close? Or could I use anything capable of a bit of power (such as MPSW06/56)? It would seem that an Ic of 2A on the 92PU01 is pretty high for what might be required here?

My previous query(ies) may have gotten buried. Given the somewhat religious fervor this topic seems to generate on other forums (without much technical justification for the most part; just assumption), I would like to know people's thoughts on this. My take from other reading seems to be if not shunt then you are a) a dumb ass, or b ) you just don't appreciate the best. I did read a critique/analysis on topic that discussed shunts presenting a more uniform impedance to the load, but then went into a discussion of a push-pull relationship via a shunt, versus a push only relationship with a linear reg. My specific interest is in a Salas shunt vs. GRLV plus for a phono…

scroll down for video

Where do I get started with case work? Obviously you get a case, drill necessary holes, and mount everything, but how do you pick cases and what kind of tools are necessary for plastic or metal?

I had a problem with the last amp i built with pcb mounted sockets where the tubes werent straight (probably because the sockets werent parallel to the board. anyone have any tips on how i can get the sockets all mounted level so the tubes can stick out straight?

Does anyone know where I can get instructions for adjusting the bias on an SRM-T1? I would like to replace the tubes and it seemed logical to find out. Then again, maybe not. Who cares? Seriously though, any help would be appreciated.

Hi guys,here is my hybrid e-stat amp design using only ONE cascoded voltage gain stage and a solidstate buffer which translate the high output impedance of the voltage gain stage into low impedance. The cascode voltage gain stage uses an ECC88 as input tube, for its low noise and high transconductance, and a 6SN7GTA/GTB to bear the high voltage(anode voltage is around 350V to get reasonable voltage swing). This stage will get approximately 200x, or 46dB gain. And please note that, the grids of ECC88 is biased at around -420V, so you can't really go DC-coupled, coupling capacitors or transformers have to be used. As most digital source components today have an ou…

Hello everyone, I'm sorry to start another thread here but maybe someone will know what I'm looking for. As you might remember, I built a Dynalo, it has been cased since. So it sounds quite good, but the real question is: could it sound better ? Here comes the idea to build a three way Dynalo with active ground, just like B

Quick question and likely an easy one, but it escapes me. If one were to have a power meter on the front of their amp, say, like the D'Agostino Momentum, what would it be connected to? I assume across the power supply...or would it be across the output? Thanks! Gratuitous picture for fun.