March 5, 201313 yr comment_564102 ^^Mud is fun, but not from that angle! Went for a ride this morning. Since I put the new shorter stem on, I am much more comfortable. I'm still waiting for the new saddle, hopefully this week sometime. I did notice that my fingers go numb now if I don't move my hands around a lot. Any way to stop that? I ride with gloves but I need to get some new ones since I've had these for couple of years. Can changing the angle of the bars and moving the hoods around make much difference? I'm now to the micro adjustment stage of getting the bike set up and this is the biggest issue left. I would assume moving the bar and changing hood angles may possible affect hand numbness as that can affect how much weight you put on your hands. Also, I'm not sure how true this is but I've read a fitter's blog somewhere that one of the main culprits of hand numbness may be because people are running bars that are a little bit too wide than they should be. I'm not saying it's the culprit here but something to consider. Report
March 5, 201313 yr comment_564115 How is you saddle set up? fore/aft as well as tilt and height will affect the amount of weight that get's placed on your hands. Do you find that you tend to slide into the bars over time? I've found that saddle position can have a pretty profound effect not only on pedaling/power production but also upper body issues as well. Report
March 5, 201313 yr comment_564116 The saddle fore/aft position was my first thought as well, could also try raising the bars..... Edited March 5, 201313 yr by Mister X Report
March 5, 201313 yr comment_564120 medium is the smallest for that model. they say its for 5'5" and up and i'm also 5'8" so i just realized that the rental I had that I thought was too big..i'm pretty sure it had a Fox fork which would have been 120mm of travel the one i demo'd last weekend that felt more comfortable had a Rock Shox 100mm fork. could that have been the difference? 2 cm isn't a big difference, but it could have contributed; I have no idea what that extra travel translates to in head tube angle. I think the LT's I have ridden were 150 up front, but I just realized the frame geometries on those are different from the regular TB's and head angle is 1.5 degrees slacker so my previous post probably doesn't apply to anything Usually when I've found bikes to not fit me it's top tube length and seat tube length that are the big contributors. If it was the fork travel issue (other thing I can think of is stem length), 120 forks can be dropped down to 100. Love the mud ... Report
March 5, 201313 yr comment_564139 How is you saddle set up? fore/aft as well as tilt and height will affect the amount of weight that get's placed on your hands. Do you find that you tend to slide into the bars over time? I've found that saddle position can have a pretty profound effect not only on pedaling/power production but also upper body issues as well. I did move the seat back about 1cm since my last ride. I will put it back in its old position and try it again on tomorrows ride. I'm also considering what MisterX said and getting a stem with more angle to lift the bars a little. The length of the one I bought made my riding position much more comfortable. Maybe rasing it up a bit will make it a little better. Report
March 5, 201313 yr comment_564142 You might be able to flip the stem to get more rise if you haven't already done that. Report
March 5, 201313 yr comment_564174 bought this. that's actually the one in Austin, I found the same one from a shop in New England for $400 less, thanks to the cold weather most likely. Report
March 6, 201313 yr Author comment_564197 Congrats, Justin! As Al said, don't break your neck or anything else. I can promise you it's not fun. Report
March 6, 201313 yr comment_564201 Nice Justin... now it's time to go road bike shopping. **BRENT** Report
March 6, 201313 yr comment_564230 Nice Justin, when are you gonna properly break it in by going over the handlebars? Report
March 6, 201313 yr comment_564239 Does anyone else find it funny that Justin went from taking his training wheels off to getting a Tallboy in 30 days... but Deepak has been on the verge of buying a bike from this century for what, a year now? **BRENT** Report
March 6, 201313 yr comment_564261 Oh, I think you did well. I think Deepak's a big, dirty slacker. **BRENT** Report
March 6, 201313 yr comment_564271 Shouldn't he have bought one of those "inexpensive" Ti bikes? Report
March 6, 201313 yr comment_564272 He could have, but he wanted a dual suspension instead of a hardtail. Those inexpensive bikes? Full bikes for less than a lot of frames. One of these days... I'll get one. One of these days... **BRENT** Report
March 6, 201313 yr comment_564276 for the trails around here, a hardtail would be fine i'm sure. but i think i have learned by now, don't buy without trying. i probably needed 2 or 3 more demos and rentals, but i found what I thought was a fair deal on something I knew I liked so i went for it Report
March 6, 201313 yr comment_564302 Does anyone else find it funny that Justin went from taking his training wheels off to getting a Tallboy in 30 days... but Deepak has been on the verge of buying a bike from this century for what, a year now? **BRENT** Actually if you count the pre-HV bike thread, more like 5 or 6 years Justin the VPP suspension is really good for light trail riding, it's pretty stiff under normal pedaling without any bumps Report
March 6, 201313 yr comment_564309 Sweet bike, Justin. Just in time for Spring in VA, too. Have fun. Report
March 6, 201313 yr comment_564318 Congrats Justin! When are you coming down for some winter rides? Report
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.