Headphones
Grok Headphones in Fullness
980 topics in this forum
-
So Oppo are following up the release of their PM1 & PM2 planar's with the 2015 release of the PM3 which is a closed back portable planar with high sensitivity that Oppo claim will run directly from your DAP. I'm not totally sure, but this maybe the first portable planar ever or if not maybe for a long time. TYLL Hertsens has a video interview with a guy from Oppo on his innerfidelity site that you may like to check, but looks like planar manufacturers are really looking to push the envelope with this type of driver technology.
-
-
- 113 replies
- 41.6k views
- 5 followers
-
-
Do my Dad really enjoyed himself at the NYC Meet. He liked the people and had a great time listening to the awesome rigs. He used to be an audio enthusiast (stereo/speaker, not headphone) and I think the Meet might have rekindled the flame. It's cool because he's nearing retirement and will need a hobby or he will drive my mother insane. And he's asked me to recommend a starter rig. I'd like to start him out with a rig for around $1000 (less would be good). Just an amp and cans for the time being. DAC will be down the road, maybe. He listens to a lot of classic rock and folk, with a smattering of female country. His hearing is not 100% and he has a really eno…
-
- 62 replies
- 10.4k views
- 4 followers
-
-
Does anyone know (a) the part number for the Beyer pad that fits on the Sony headphone, and ( either the URL, or how to order it from Beyer? I can't seem to find it, now that they've revamped their site. I know it's the pad to the DT-250, but that's all I know.
-
- 4 replies
- 2.5k views
-
-
Now here is something fun... a new electrostatic set from Russia. I do read the Russian forums a bit and I've been following the semi-DIY stuff going on over there. Seeing that this one had matured I decided buy one. Here is the website for anybody interested: http://phenomenon.su/ I ordered it directly and this set was custom made for me. They have two versions available and I picked the Libratum as I prefer circular transducers. Cost was less than 2k$ with shipping here. As you might tell from the pics, the build quality is super impressive and makes most other headphones look like toys. I for one like the Russian utilitarian style where it is all a…
-
-
- 25 replies
- 17.2k views
- 2 followers
-
-
Anyone? They're closed, so I am, of course, curious. Stereophile has a review of the MS 400 in the current issue. The red makes it moar bettar. But I, of course, am interested in the moar black PS 500.
-
- 70 replies
- 12.3k views
- 5 followers
-
-
Got my Fidelio L1 today, and after 30 mins of listening, I like it a lot so far. Of course, I have to burn it in for 10 weeks and change the cable to baby unicorn hair, but so far so good.
-
-
- 89 replies
- 29.2k views
- 3 followers
-
-
Hi Guys, I've not touched my ambitious β22 build in ~7-8-months due to lack of time. It's very close to being working, but a fair amount of work to do to complete it. I need some headphones to try out the portion finished so far, I don't have any. I don't want to quickly try it driving speakers as I don't have thermal switches or ε24s built yet. I'd like to be able to test both the balanced and unbalanced amplifier configurations, so easy plug recable would be a bonus. Off the top of my head I can only think of HD 650, which I can get new for
-
- 8 replies
- 2.3k views
- 1 follower
-
-
Dear All, I just bought an old pair of pioneer headphones, the seller told me that they are using the ribbon technology. How can I check whether it is true or not? anyone know this headphone? cheers,
-
- 12 replies
- 5.3k views
- 2 followers
-
-
I'm finally in the market for some new headphones, and I think I've got it narrowed down. I'm looking at either Audio Technica's W1000 headphonse or their AD1000PRM headphones. The only difference I know is that the W1000s are slightly more expensive and are closed rather than open. What I don't know is whether the headphones being closed is a bad thing in terms of sound accuracy... since sometimes it seems that can cripple a pair of cans. Basically, I'm looking for something that'll work especially well for orchestral/classical sorts of music. I'm slightly concerned about the bass being underpowered... I don't need to have my eardrums dominated by bass, but it's g…
-
- 27 replies
- 5.4k views
-
-
Chris Martens rounds up some of the usual suspects.
-
- 30 replies
- 6.2k views
- 3 followers
-
-
My earphones suddenly made a cracking sound and afterwards it did not produce sound. Why??? Those earphone were expensive. (In my opinion.) Why did it happen anyway?
-
- 12 replies
- 2.7k views
-
-
Anybody likes to make a recommendation what to try next? I am mostly listening to metal, guitar oriented rock, singer/songwriter and occasional country. I really need good mids, both for the guitars (enough punch) and for voices (actually hear what's going on). Here's my history of headphones: Current favorites: DT-770, but a little too boomy, in particular at high volumes. Like the closed sit and general quality. Not enough punch in the area where distorted guitars sit. Runner up: Proline 650, but too microphonic, not really comfortable, too much noise to the outside and a little thin sounding. Sennheiser HD-250 (not II): best with distorted guitars among what I …
-
- 167 replies
- 30.7k views
- 9 followers
-
-
-
Hello, I have a vintage pair of Realistic PRO-50 headphones which I believe are the same as the AKG K250 600 ohm. (Made for Radio Shack by AKG.) They sound fine except for a very poor bass response. If I play them through either a software or hardware equalizer with the base controls pushed up high I do get a better bass response. I am using them with a Schiit Magni 3 amplifier set on the high position. I also get the same results with other headphone amps. Is this normal for this headphone? Are there any modifications to the headphones that I can make to improve the bass response? Many thanks in advance for any help.
-
-
- 3 replies
- 2.7k views
-
-
http://cgi.ebay.com/Vintage-GRADO-HP-1000-AUDIOPHILE-HEADPHONE-HP-2_W0QQitemZ190101384730QQihZ009QQcategoryZ40137QQrdZ1QQcmdZViewItem Whats the deal with this seller? I know he had an auction up for this exact same pair of HP-2s a couple weeks back or so. Scam?
-
- 4 replies
- 1.9k views
-
-
This question will probably be a bit Head-Fi-ish, but I trust you all a lot more, so I'll try my luck...... I am hoping for some input on a decent portable/travel headphone. I have some SuperFi 5Pro, but despite trying lots of different tip options I have come to the conclusion that IEM's are not for me, so I suppose that portable closed phones are my only other option. I do already have ESW9 - pleasing tone, but they are 'slow', relatively fragile and have poor isolation. My bristly shaved head is also destroying the leather headband. I've been looking at the Beyer DT1350 which I can get locally for CA $310. Another possible option is the venerable HD25i-II at CA $…
-
-
- 101 replies
- 27.3k views
- 1 follower
-
-
So I've been hearing some interesting (some of which are believable) guesses and predictions regarding headphones that might be around the corner. Anyone want to chime in on what they think might be coming up? I'm predicting a lot of people will actually try to avoid this thread since it is based on nothing but guesses and rumors. But let's make sure once and for all. The comments in this thread will be pure speculation unless otherwise noted. New Stax? New Sennheiser dynamic headphone? 45th anniversary A-T woodie? Etc.? Just predictions. Just for fun. I hope nothing will be taken too seriously here.
-
- 23 replies
- 5.5k views
-
-
-
Can anyone tell me the current price of the king combo HE90/HEV90? I am just curious about its price. And I know it should be over 10K
-
- 8 replies
- 3.7k views
-
-
My new PS 1000's just arrived. They sound promising, but seem to need some serious break in time. Anyone out there been through this? If so, how long did it take?
-
- 117 replies
- 22.1k views
- 9 followers
-
-
I got my cans and my amp back yesterday. The ps-1's are recabled with a custom beryillium copper alloy cable, and the rs-1's are recabled with a moon audio black dragon. The amps 1/4" neutrik was replaced with a 4-pin xlr and some of the wiring was redone. My initial impressions are that the sound is more open and 3d. The bass has become bloated, and the overall sound is less refined. I prefer the ps-1's over the rs-1's currently because of their added refinement and better sound stage, but the rs-1 midrange does have its moments. Biggie.
-
- 14 replies
- 3.2k views
-
-
From the private collection of John Grado. Serial # JAG8. I think Billy should buy them.
-
- 304 replies
- 50.7k views
- 9 followers
-
-
Hadn't heard about these. http://www.psbspeake...ucts/headphones
-
- 20 replies
- 6.8k views
- 1 follower
-
-
Hello, I just would like to know your opinion: which headphones are better Sennheiser PX100 or Sennheiser PX200. Also, what is the difference between Authentic Sennheiser PX200 and Faulty ones? How to notice a difference? Please, help me... I have already ordered PX200 and I am not sure if they are authentic Thanks
-
- 56 replies
- 14.5k views
-
-
I've started noticing a certain amount of discolouration and and 'ragging' at the edges of the "pads". (as 010 owners know, "pad" is a bit of a misnomer) What would you recommend for nourishing the 010 leather? NO ARMOR ALL!!!!!!!!!!!!!!!!!!!!!!!!!! (oh yeah, perhaps no need to say that... Sovkiller's gone )
-
- 4 replies
- 2.3k views
-