Speakers
I Can't Hear You, Speaker Man, I'm Listening to My Headphones
324 topics in this forum
-
No, that's not a typo, but no, I don't truly mean "at any price" greater than US$200, I just mean this: I recently put my speaker rig back together. The Manley Stingray -- at 12 tubes, 8 of them power tubes -- is just way too warm for a closed room in the summer. I am seriously considering getting this amp as my "summer amp". What is the next step up from that? Obviously, it doesn't have any competition at the US$200 price point, but is there something in the "not much more" category that I should be considering? It'd be nice if it was a pretty strong amp (I.E. ~> 50 Wpc). The Dynaudios suck current like a Greek sucks down souvlaki. (With apologies to any Greeks out…
-
- 2 replies
- 2.1k views
-
-
There seem to be quite a few speaker folk here, so I'm hoping you can help me out. I'm setting up an office system (pretty big office, but I don't listen very loud) and I would like to hear any suggestions you have. In another office I have some older Paradigm Atoms (I think V3) and a powered Paradigm subwoofer. It's nice, but I think it lacks a little treble and spaciousness. I don't want to get another subwoofer, so I'm looking for a set of monitors only. The bass response is less important to me than the treble and dispersion of sound. Something that doesn't require speaker stands would be preferable. The rest of the system is not definite yet, but I think I'll go w…
-
- 18 replies
- 4k views
-
-
Ok let me explain how my speaker rig is currently setup. I have the APL 3910 and the Modwright 9100ES going into the two of the inputs on the Modwright SWL 9.0SE. The modwright pre's outputs are connected to the D-Sonic power amp. Now on to where the problem(s) come into play. I also have my denon 4308ci recievers front channel pre-outs connected to the HT Bypass input on the Modwright pre. The ht bypass input essentially ignores the volume control on the modwright allowing the volume to be controlled by only the reciever. When I have the reciever on (and the ht bypass input on the modwright pre selected) I have a pretty nasty ground loop hum. The hum i…
-
- 47 replies
- 8.6k views
- 6 followers
-
-
Hey Speaker Kids: Don't I remember reading that the *L2 series of Quad speakers got worse reviews then their previous L series? Reason I ask is there are these demos for sale on Audiogon: http://cls.audiogon.com/cgi-bin/cls.pl?spkrmoni&1206234899 I could put this on my desk next to my monitor, and power them off the other speaker outs on my 840A. But if my memory serves me, I'd be better off waiting for a regular 11L (or 12L if I want to go active).
-
- 7 replies
- 4.5k views
-
-
-
Anyone here know cheap speaker cables with small/skinny spade plugs? My McIntosh 2100 has tiny speaker taps (there's a pic of it around here somewhere) and most spades won't come close to fitting, unfortunately.
-
- 9 replies
- 2.4k views
-
-
After years of only Headphone listening, I'm finally jumping on the speaker party. Coming from the headphone hi.end I must say it has been pretty disappointing on the performance side with speakers..Most need to get the volume up to lvls where it gets shouty or annoying to get some kinda engaging sound and most just sound thin.. specially if music is not perfect jazz records, some get crazy details but again, music is nowhere engaging. Enter the Zu's, I heard the Zu Omen Dirty Weekend II on the dealer(have never heard of them) and loved the sound, totally different from most known brands, this speakers can truly rock. They have such a dynamic and forward sound,…
-
-
- 10 replies
- 6.9k views
- 2 followers
-
-
Finally got it to work. Of course I have to pull the amp out when I'm actually listening so the cord reaches the outlet, I'm using an ipod as source, and monster speaker cable, but it sounds amazing. I played the theme from shaft and sitting extreme (EXTREME) nearfield it sounded like I was actually sitting next to the hi-hat. The placement is awful obviously, that little green thing in the corner is my bed, which is touching the other side wall. So there is plenty of room for improvement. Eventually I will make stands or something so they can be placed at my desk, but they are just way too heavy (and so is the amp) to be supported by it.
-
- 6 replies
- 2.2k views
-
-
I've got a great pair of speakers in the Alon Lotus SE's. They do so much right and are untouchable (IMHO) in the used under $2k category but I have been chasing the horn dragon since attending VSAC a few years back. Best sound at the show for me was a toss up between the GoTo horns and the modded Altec Voice of the Theaters that Exemplar was running. The presence was downright scary and they were super fast. Well I've owned the Klipsch Heresy speakers and they did not do much for me. They were fun but showed their age with lack of extension and detail. This was after a cap upgrade and tweeter upgrade. They were good for the $$$ but not keepers. So I am pondering a …
-
- 27 replies
- 14.7k views
- 8 followers
-
-
OK, so I'm trying to build a stereo system from scratch for the gf. So far, I managed to find a pair of used Maggie MG10s, but I still need a dac and amp for an htpc as source. And probably a sub, but I'll save that for later. I'm trying to shoot for 100W to 250W rms, which is what the manual says I should do. I want to keep the budget tight, as she's no audiophile; when I'm not there, they're most likely not going to play music. I'm shooting for under $700 used for the dac/amp. I've managed to come up with a few budget ideas: - vintage Adcom based system with maybe the 600 dac, 555 amp, and some kinda pre - Outlaw's RR2150 - old NAD integrated plus a dac? I really …
-
- 8 replies
- 4.5k views
- 1 follower
-
-
Ooooh, shiny: McIntosh | Special Edition Only 60 will be made for the USA...hrmm, anyone here think they'd get one? Price: $15K for the pre-amp and monoblock system
-
- 6 replies
- 4k views
-
-
I need something that I can move with relative ease yet still give me halfway decent sound, so I guess monitors are where it's at. 1) The room: The red outlines the living room; there is no separation between it and the kitchen. Monitors will have brick in the rear facing towards regular wall paneling/drywall (or whatev). 2) The budget: roughly $2,000. The only thing I've got taken care of is the source. I would need to consider the monitors, possible amplification if passive, stands, and subwoofer/amplification for it. 3) The preferences: Bass is not vital, just looking for some sense of accuracy. Love midrange, that is probably priority. No particular t…
-
- 106 replies
- 28.2k views
- 8 followers
-
-
I'm just about done building the Leach amplifier (~100Wrms / channel). I was hoping to get some suggestions for first speakers to match with it, probably in the price range $200-400. All I've got now are some no-name bookshelf speakers. Some floor-standers might be nice, but I really don't know too much about speakers. Thanks, Evan aka bperboy Here's one channel completed. I haven't finished building the other channel yet. Forgive the messy wiring; I will tidy it up nearer to the end of the project.
-
-
- 59 replies
- 18.9k views
- 3 followers
-
-
So my parents are looking to upgrade the entertainment room (still using an old 32" tube tv). They've settled on the Samsung 52" A650 model and they asked me to look up what budget receiver to buy. I'm thinking something around $300 (??) would be fine for them. Do you guys have any suggestions? They don't need all the bells and whistles. They just need something simple that works. I'm sure you guys know what I'm talking about, especially when it comes to parents who have a hard time managing 2-3 remote controls (2 cable boxes and tv). And yes, I'm going to be buying them a Harmony remote.
-
- 3 replies
- 2k views
-
-
Hey guys, anyone here tried/own a pair Von Schweikert VR-1 bookshelf speakers? My cousin's friend is selling a brand new pair for $1000. Apparently the guy liked it soo much he bought two pairs back in the day with one serving as backup. The set he is selling is the backup set which is new and unused. I have no experience when it comes to speakers so I
-
- 8 replies
- 3.5k views
-
-
Just noticed that Emotiva has some reasonably priced powered speakers ($399, $599, and $799/pair). Any thoughts? http://emotivapro.com/products/powered_monitors/airmotiv5.php
-
-
- 77 replies
- 37.4k views
- 2 followers
-
-
I'm Allen,I'm writing to share my newest electronic gadget with you all.If you have any perfect electronic products ,welcome to share here together. I regards myself as an electronic fans,I always focus on newest electronic technologies.I do these Just because I want get the best quality with the most reasonable prices electronic gadgets.I expect what I do can give you a bit little help. Last week, I got a pair of wired speaker,it shocked me a lot,so I'd like to share with you all. Here it's picture link,I think it has a nice and classical designed style.you agree so? spammy picture deleted The design is superb the speakers sport a gray metallic p…
-
-
- 10 replies
- 5.1k views
-
-
So I find myself listening to a lot of tunes while browsing the internets, either through streaming radio (archive.org, grooveshark, etc) or foobar, all through my $11 logitech speakers, since I don't always feel like strapping on headphones. I'd like to upgrade my speakers, but not to anything too fancy. I'm looking at a few options: Audioengine 2's - just run straight from whatever DAC I am using, either using their own volume pot or using the DACs volume if I end up buying an XDA-1. Paradigm Atom - powered by my Beta22 once it gets all ship shape and up and running. My concern here is if the Beta has the juice to push the Atoms, which specify a minimum of 15 watt…
-
- 25 replies
- 16.2k views
- 2 followers
-
-
Good Morning Team! So I've decided 2009 is the year of new speaker amplification. I have no intentions of upgrading my vinyl rig until the distant future, and I'm done with digital sources indefinitely. My speakers are Quad 22Ls, and my current amp is the Cambridge Audio 840A integrated. When I was posting of my out of control bass woes over at Audio Asylum, at least one guy who I've exchanged emails with before said the 840A might be the problem, and that I should look to other amps. Well I don't have bass problems anymore since I moved the speakers into a new room, but I certainly could appreciate some greater control and heft in the bottom end. My issue here …
-
- 58 replies
- 12.2k views
- 1 follower
-
-
I don't know if Tyll wanted to start a topic or not, but here's the new Headroom Audiophile Desktop line. http://www.headphone.com/products/audiophile-desktop/ Looks really nice overall. I especially love the speaker stands and I understand why Tyll has to price them like that (explained on that other place), but damn, if only they were cheaper/I were richer/etc.
-
- 45 replies
- 8.8k views
-
-
Any thoughts on the Outlaw Audio M2200 amps? Outlaw Audio They are class G amps, and I know Barry Diament at SH forums really likes them with Maggies. And they're cheap and easy to resell. Model 2200 Technical Specifications * Power Output (FTC Continuous RMS): - 200 watts @ 8 ohms, 20 Hz 20 kHz, < 0.05% THD - 300 watts @ 4 ohms, 20 Hz 20 kHz, < 0.05% * Short Term Dynamic Power Output: - 300 watts @ 8 ohms * THD Signal to Noise: 100 dB (unweighted) * Input Impedance: > 10K Ohms * Gain: +27dB (1.7V sensitivity) for full output * Input Connectors: RCA Jack * Output Connectors: Fi…
-
- 24 replies
- 14k views
- 2 followers
-
-
Hi All- I've been using the following setup in a 10 x 13ft room now for the past several months: Quad 22L Cambridge Audio 840A Cambridge Audio 840C Technics SL1200MK2 Cartridges used include DL-103, AT440MLa, KAB/Ortofon ProS30 Phono's used include Hagerman Bugle (60db gain 100 ohm loading for DL-103) and Bottlehead Seduction (for MM) SVS 20-39 PCi Cylinder Subwoofer Blue Jeans LC-1 interconnects I only recently added the subwoofer to combat bass issues I was having due to what I guess is room compression. The bass from the 22L floorstanders has always been a bit boomy and unsatisfying in the lower regions. Adding the SVS and keeping the crossover at 40hz …
-
- 65 replies
- 12.4k views
- 5 followers
-
-
I'm planning on using my ?22 as a preamp with McIntosh MC2100 and Eminent Tech LFT-8b. Just wondering if anyone around here knows how ?22 stacks up as a preamp. I'm hoping to get a standalone unit, but that won't be for a while with recent and upcoming non-audio expenditures. Oh, and anyone has thoughts on Promitheus Audio TVC? It has rather attractive price and seems to be well-received (though it would be nice if it had a remote).
-
- 29 replies
- 6.6k views
-
-
So what was the consensus for this -- the question being, what's the best cheapest "totable" speaker dock/pair of actives/whatevs for the iPod. AudioEngine A5's? Quad 12L? Martin-Logan CLX? Bose? I guess the single thing I would miss the most is not distorting at medium volumes in the mid-field. Any 2.1 systems worth looking at that have any decent bass? I'm considering something like this or even ugly like this, but I suspect the latter of a midrange suckout (tweeters and woofers, no mids), and the former of boombox sound (doesn't go loud* enough well). * And by loud, I don't mean party loud, I mean just normal for most other people loud.
-
- 4 replies
- 7.9k views
-
-
Hi all, I'd appreciate your help on the following: I have medium pile carpeting over an uneven floor in my listening room. My old Apogee Centaurs used to have spikes and they were always a nuisance because it was so hard to reposition. After those speakers died (RIP - I loved them!), I have since acquired a pair of used Meadowlark Shearwater Hotrods which I'm very happy with, but they didn't come with their spikes. I am noticing now that the left speaker's back left edge is tilted back a bit because of my uneven flooring under the carpeting. Now I'm missing those spikes I used to hate. I wonder how much it is ruining my imaging because I think even small changes in how…
-
- 32 replies
- 8.7k views
- 3 followers
-