Headphones

So I've officially fallen off the wagon again as I got one of these just now. I swore I was done buying headphones but clearly not... So I just put them on my head so listening impressions will come later but first some over all impressions. Now the case...the case is super retarded whoever came up with should be patted on the back for being super "special". It's pretty much Head-fi in a case form, has wank factor off the scale but is utterly useless. Way, way too heavy too. Now the cable, from the outside it looks well enough made but I will open it up to see what's inside. The pins on the plug were all bent and it looks like the whole front of the plug has b…

These look to be full of suck. Frends

So this rather strange headphone just arrived from HeadRoom. What is even stranger, is that after I ordered it, both it and the 2200ULE disappeared from the HeadRoom site alltogether and have yet to return. Is it something I said? This headphone is pretty weird, and I have to say that without any burn in it sounds like rubbish for $400. More later!

A friend alerted me to this and I didn't see it posted anywhere else: http://gizmodo.com/5990520/scientists-have-made-graphene-earphones-and-theyre-amazing I'm not really surprised that a membrane that thin yet strong can produce good sound. But I am excited to see who adopts this tech first and what sort of amp is required to drive them.

I received my APureSound ER4P cable yesterday from Alex. Ever since the cable on my ER4P began cutting in and out, I had been thinking about whether I should go for [AK]Zip's cable (costs about the same as the Ety itself) or send it to Etymotic for repair (said to be $50). After hearing APureSound recabled KSC75 at a recent meet, I became convinced that it was worth it. I had no question about the workmanship as Alex is well regarded. My trepidation was about the degree of improvements that would be achieved. My only complaint about the ER4P/S sound was that it can sound a tad thin at times, and it seemed that Alex's cable would address this. Enough blabbering, on with…

Having owned a DCA Aeon Noire for a while the DCA Stealth got me interested. I like what Dan is trying to achieve, with the introduction of the Expanse I couldn’t resist the urge to buy another flagship. So I have an Expanse incoming, will be pairing it with a CFA2. I do not like the dicky naming of the products, minor gripe hopefully I’m happy with what the Expanse brings to the table being that I love what the Noire achieves at its price point. Will be updating with impressions when I’m ready, has anybody heard or owned a DCA Stealth or Expanse?

I searched for the best and pretty bass heavy headphones under $200. I narrowed down my search to: Denon AH-D1100 and D2000(I have somewhere to buy it for $200) Ultrasone 580 and 780 V-Moda Crossfades LP I want to know which one is best for: DnB Dubstep Techno Rock/Metal Rap I want a bass close to overpowering but not overpowering. A nice soundstage is nice too. I also need an amp and DAC or amp alone for less than $120,recommendations? It has to include a bass boost(the MoaR the better.)

All this time, I never bothered to take off the earpad, but once I did, I found TWO layers of substantial foam between the driver and the mesh. My camera is MIA, but one is a round piece of foam, and the other is another round piece with a small hole in the middle. These are what gives K701 that strange sensation of detailed yet kind of detached sound b/c once you take the foams out, K701 almost approaches the immediacy of high-end Grado's. Taking both foams out was a bit to much and stark, and I wouldn't recommend it unless your setup is quite dark and distant. But just taking out the foam with the hole has left me with a nice balance in my own setup; of cours…

Hey guys, Ive been lurking here for a few weeks now, trying to get the hang of your little bashing circle here... I just picked up a pair of RS2i's and although am not finished building my M^3 amp am very impressed with the sound coming out of them and my CMOY... What sort of music/ gear do you guys enjoy listening to these things with?

Well, it seems AKG has updated some of their mid-level phones. I just bought my K271 couple of months ago, too. http://www.akg.com/site/press_center/powerslave,id,152,nodeid,0,_language,EN,nodeid,33.html

i want to know if the 20 step up is worth it i cant get a clear sense with just stats. please help me out, buying my first pair of headphones, i tried my dads old SR-60s (idk if its the same as the "i") (i if it applies) i listen to mostly jam and live music (audience recordings, or soundboard) but i like techno (bass) and good mids do these work out, or better low cost choice?

When it rains it pours... I did a potentially stupid thing yesterday (took off the cover/earpad on the HD580 while music was playing) and now there seems to be some distortion* on the left side. It is definitely the headphones (I have switched out the amp/dac). Could this be anything more than getting some fuzz hair on the driver - I don't see anything obvious with the naked eye - or could there be some other damage since the driver was being used when I removed the cover? If there is some dust or hair, how do I get it off, especially if it is not obvious where it is? *I think it is distortion. When playing low bass, it buzzes a bit like really cheap speakers …

I'm having trouble with intermittent signal loss due to problem at strain relief/cable entry. If I hold the cable near the strain relief and twist it, I can get the signal back, so naturally I'm guessing that something is loose. The problem is that I have no idea how to take the strain relief apart, let alone any experience with a soldering iron to fix it. Does anyone have a suggestion on where to get this fixed? I've noticed that Yama's is not the best place to go, and besides this pair is beyond its Japanese-only warranty period. I'm cool with a whole recable or something like that, but I don't see any examples of work done on any of the small-time headphone cabling sho…

So I received my K1000's. Unfortunately the headband is a bit saggy. Does anyone here know how to re-tension this headband? I can either increase the tension on the headband or surgically lower my ears. I think I would prefer the first. Renato

I have a pair of wooden MS1's which I find incredible for listening to electric guitar rock. I tried a pair of RS2is but they didn't accurately portray the tone of the guitar (IMO.) So what would be next to try as an upgrade: HF2's, RS1's, or MS-pros ?

Today, I had an opportunity to listen to the new Stax flagship prototype (referred as C32 below) at Fujiva Avic store in Tokyo. They had it for demo during the holidays and I took the opportunity to spend about 1 hour and a half switching back and forth between the C32 and the current Omega 2 (referred as 007A below). The background to this headphone was discussed here ( http://www.head-case.org/forums/headphones/8990-holy-crap-new-stax-omega-looks-fierce.html ). For me, it is the second time I have a chance to listen to the C32, see here for the previous encounter ( http://www.head-case.org/forums/headphones/8990-holy-crap-new-stax-omega-looks-fierce-2.html#post400121…

What are your favorite cans for classical? For me, the HD650 still reigns supreme. I admit, sometimes I do listen to classical on the HP-2, but it does seem to lack the space and bottom end "oomph" that these ears crave on large orchestral works. I have tried, tried, tried so many times with the HD600, but it just doesn't do it for me. I thought the Dynahi might officially "wake them up" for me, but they are just too dry and boring. If the HD600 is a waxy hershey's kiss, the HD650 is a giant gob of dark godiva.

All i want is to connect this wires from my pair of headphones. In the left is the 3.5 jack Sent from my iPhone using Tapatalk

Anyone?

Hi All, I would like to raise the issue on human ageing, with the special focus on the ageing of human hearing and the use of TOTL headphone gear, i.e. headphones for more than 2,000 Euros, e.g. STAX headphones for 5,000 Euros and headphone amplifiers within the same region (5,000 Euros). But this does not focus at Stax only, of course, as there are so many extremely expensive headphones (electrostatic, magnetostatic, dynamic) in the market right now. I don't know how old you are, of course all ages are represented here at the forum. But I also find old headphone veterans, here, who have been active in the scenery since the 1990's or 1980's. BTW, I started…

Kind of interesting. No sense of what they will sound like, but the project is a go at this point. https://www.kickstarter.com/projects/plpl/rock-hard-canadian-maple-headphones?ref=thanks

Hi y'all, I have a Stax SR-007A e-stat (with the blu-tac port mod) energized by a Stax SRM-T1S with the CCS mod running a pair of NOS US-made Tung-Sol 6SN7GTB tubes through angled socket adapters at 6.0 mA / tube section. The signal from my DAC (RME ADI-2) is being fed through custom-made balanced XLR cables and the energizer is powered by an Audioquest NRG-Z3 power cord. The system has been running fine for at least a year. Yesterday I removed the earpads for a routine cleaning of the driver (dusting off the dust covers, etc.), but after that the 007A developed what seems to be a ground loop in the right channel. The right driver started having this 60 Hz hum t…

holyshitholyshitholyshit, freaking out, hyperventilating... fingers crossed [more later, you can guess if you'd like though]

Three of the world's best headphones | The Audiophiliac - CNET News At least the Beats were not on the list. I guess I should finally break down and go listen to some Grados.